DIY Magic mirror kit

Take that extra PC you have lying around and turn it into an Interactive Magic Mirror. You build the hardware using an Arduino and some sensors following the instructions on http://diymagicmirror.com and then install the DIY Magic Mirror Software which runs on the PC, Mac, and Linux.

Magic Mirror Features:
* Weather Forecast * Stock Performance * X-10 Control (Lighting and On/Off)
* IP Camera integration
* Picasa based slideshow * Can be personalized with your own Videos Personalize it with your own Videos * Runs as a native application on the PC, Mac, and Linux
* 4 Characters/Modes: Princess, Pirate, Halloween, and Insult

Kit Includes:
* Seeeduino Atmega328 (Arduino Clone) * Magic Mirror Arduino Shield PCB
* Registration code for the Magic Mirror Software
* 40 Pin Header
* Power Header and Cable
* DB-9
* Slide Switch
* RJ45 Jacks (2)
* 10K and 220 Ohm Resistors * 5mm Blue LED
* Magic Mirror Software * 2 Cat5e Cables (T568B wiring)
* 1 Push Button Switch * Mini USB Cable * Kit Carrying Case
* 10K Potentiometer PCB Pins
* 10K Potentiometer Lug Pins (to be externally mounted)
* Hook Up Wire (24 Gauge)

You Supply:
* The PC (desktop or laptop)
* Picture Frame * Sensors Specific to your Installation, Supported Sensors http://diymagicmirror.com/sensors.html
* Two-Way Mirror (Optional) * X-10 Modules (Optional)

After assembling the kit, please download the software from :
http://diymagicmirror.com/install.html
The software registration code is included with this Kit.