Produktbeskrivning
A10S is a new processor from Allwinner with Ethernet and HDMI support. Aside from the A10S Cortex-A8 @ 1GHz the board also has 512MB RAM + Ethernet 100Mbit + USB Host/USB-OTG + SD-card + SD-MMC card + HDMI is released. It can be used as a media center, general Android device or a general-purpose Linux device
FEATURES
A10S Cortex-A8 processor at 1GHz, 3D Mali400 GPU, NEON
512MB RAM
NO NAND FLASH memory
NO BUILT-IN OS
USB High-speed host with power control and current limiter
USB-OTG with power control and current limiter
HDMI output with ESD protectors
100MBit native Ethernet
Audio Line-input
Audio Headphones output
UEXT connector
LCD connector to work with 4.3, 7.0, 10.1" LCD modules from Olimex
50 GPIOs on three GPIO connectors
MicroSD card connector
SD/MMC card connector
DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
STATUS LED
Power LED
2KB EEPROM for MAC address and other storage
5 BUTTONS with ANDROID functionality + BOOT/REC and POWER buttons
Microphone input on connector (not populated)
Composite TV-output on connector (not populated)
JTAG-DEBUG connector (not populated)
UART1 connector (not populated)
+5V input power supply, noise immune design
4 mounting holes
PCB dimensions: (4000 x 3200) mils ~ (101.6 x 81.28) mm
FEATURES
A10S Cortex-A8 processor at 1GHz, 3D Mali400 GPU, NEON
512MB RAM
NO NAND FLASH memory
NO BUILT-IN OS
USB High-speed host with power control and current limiter
USB-OTG with power control and current limiter
HDMI output with ESD protectors
100MBit native Ethernet
Audio Line-input
Audio Headphones output
UEXT connector
LCD connector to work with 4.3, 7.0, 10.1" LCD modules from Olimex
50 GPIOs on three GPIO connectors
MicroSD card connector
SD/MMC card connector
DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
STATUS LED
Power LED
2KB EEPROM for MAC address and other storage
5 BUTTONS with ANDROID functionality + BOOT/REC and POWER buttons
Microphone input on connector (not populated)
Composite TV-output on connector (not populated)
JTAG-DEBUG connector (not populated)
UART1 connector (not populated)
+5V input power supply, noise immune design
4 mounting holes
PCB dimensions: (4000 x 3200) mils ~ (101.6 x 81.28) mm