Produktbeskrivning
mikroProg is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10®, PIC12®, PIC16®, PIC18®, dsPIC30/33®, PIC24® and PIC32® devices in a single programmer! It supports over 897 microcontrollers from Microchip. Outstanding performance, easy operation and elegant design are it's top features.
SingleClick Debugging
mikroProg has native support for mikroICD - hardware step-by-step In-Circuit Debugging in mikroElektronika compilers. It supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6] Run To Cursor[F4] debugging operations, as well as standard and advanced breakpoints.
Faster programming
We have done major enhancements in programming and debugging algorithms, and boosted programmer electronics to make it all possible. And the results are stunning! mikroProg is up to 400% faster than LvPICFlash.
One firmware for all devices
With mikroProg, single firmware takes care of all supported architectures. Supporting new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite your programmer is ready to program new devices.
Power your target board
mikroProg can provide power supply to your target board. Using mikroProg Suite Software, or directly from your compiler you can set the voltage level to be generated for you. It can provide up to 150mA of current in the voltage range from 1.8-5V.
Compatible with PICFlash
If you have already integrated previous programmer connector in your device, don't worry. mikroProg retained the original connector pinout. Use front row of the connector (next to the knob) when programming mikromedia boards.
You won't rip out the cable
How many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.
mikroProg Suite for PIC®
mikroProg programmer requires special programming software called mikroProg Suite for PIC®. This software is used for programming ALL of Microchip® microcontroller families, including PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32. Software has intuitive interface and SingleClick programming technology.
mikroProg is packed in the protective box along with the relevant documentation and product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:
* Damage resistant protective box
* mikroProg programmer with mikroICD support
* USB cable
* User Manual
* DVD with documentation and code examples
SingleClick Debugging
mikroProg has native support for mikroICD - hardware step-by-step In-Circuit Debugging in mikroElektronika compilers. It supports Step-over [F8], Step-into[F7], Step-out[Ctrl+F8], Run[F6] Run To Cursor[F4] debugging operations, as well as standard and advanced breakpoints.
Faster programming
We have done major enhancements in programming and debugging algorithms, and boosted programmer electronics to make it all possible. And the results are stunning! mikroProg is up to 400% faster than LvPICFlash.
One firmware for all devices
With mikroProg, single firmware takes care of all supported architectures. Supporting new microcontrollers is easy. Just by downloading the latest version of mikroProg Suite your programmer is ready to program new devices.
Power your target board
mikroProg can provide power supply to your target board. Using mikroProg Suite Software, or directly from your compiler you can set the voltage level to be generated for you. It can provide up to 150mA of current in the voltage range from 1.8-5V.
Compatible with PICFlash
If you have already integrated previous programmer connector in your device, don't worry. mikroProg retained the original connector pinout. Use front row of the connector (next to the knob) when programming mikromedia boards.
You won't rip out the cable
How many times have you pulled the cable out of some device accidently and it just stopped working? We made sure to provide a secure connection of programer cable and created a holder to tie it firmly into place.
mikroProg Suite for PIC®
mikroProg programmer requires special programming software called mikroProg Suite for PIC®. This software is used for programming ALL of Microchip® microcontroller families, including PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32. Software has intuitive interface and SingleClick programming technology.
mikroProg is packed in the protective box along with the relevant documentation and product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:
* Damage resistant protective box
* mikroProg programmer with mikroICD support
* USB cable
* User Manual
* DVD with documentation and code examples