Produktbeskrivning
9DOF click carries ST's LSM9DS1 inertial measurement module that combines a 3D accelerometer, a 3D gyroscope and a 3D magnetometer into a single device outputting so called nine degrees of freedom data (3-axis acceleration, angular velocity and heading), in 16-bit resolution. 9DOF click communicates with the target MCU through the mikroBUS I2C interface (SCL and SDA) with additional functionality provided by the programmable Interrupt (INT) pin, as well as the Enable (EN) pin. The IC has multiple interrupt lines which can be accessed through jumpers on the click board. I2C addresses are specified in the same manner. The board uses a 3.3 power supply only.
3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer in one IC
Measuring ±2/±4/±8/±16 g acceleration
±4/±8/±12/±16 gauss magnetic
±245/±500/±2000 dps
Multiple interrupt lines
Selectable I2C addresss
Individual sensors can be powered down to reduce consumption
Ready-to-use examples save development time
3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer in one IC
Measuring ±2/±4/±8/±16 g acceleration
±4/±8/±12/±16 gauss magnetic
±245/±500/±2000 dps
Multiple interrupt lines
Selectable I2C addresss
Individual sensors can be powered down to reduce consumption
Ready-to-use examples save development time
