This board allows you to develop easily an application with Ethernet connectivity. It has everything you would normally need for such a purpose: power relays which you can command through web interface. LCD display which will display messages you fill in web forms, analogue inputs for connection to sensors, digital optoisolated inputs, trimmer potentiometer, temperature sensor, Ethernet connector. With this board you can easily automate your home and then control and monitor it from any point in the world via Internet. The extension connector is available so you can connect your cusom made hardware hassle free. The PIC18F97J60 has 128KB Flash programming memory and there is also an external 1Mbit (128KB) flash memory for data storage. The on-board DC/DC converter makes this board very tolerant to the external power supply which could be in 9-25V DC or 7-18V AC range, the bridge rectifier on the input allows both AC and DC adapters usage and makes power supply polarity problems go away.
PIC18F97J60 microcontroller with embedded Ethernet MAC and PHY and 128KB Flash programming space
1Mbit on board serial flash for web pages storage
ICSP/ICD connector for programming and debugging with PIC-ICD2 and PIC-ICD2-POCKET.
Trimmer potentiometer connected to analogue input
Two relays 10A/250VAC
Four optoisolated digital inputs
Twelve analogue inputs on terminal block
LCD16x2 with backlight
Complete web server and TCP-IP stack support as per Microchip’s open source TCP-IP stack
Terminal block for power supply works with 9-25 VDC power supply
Extension header to connect to other boards
Dimensions 120×108 mm (4.72×4.25″)