Arduino Make Your UNO Kit

Arduino Make Your UNO Kit. Educational kit for building and understanding a complete UNO R3 microcontroller and a synthesizer.

Specifications:

• Contents: Parts and components for a complete UNO R3 (original design)
• Microcontroller: ATmega328P
• USB Interface Chip: CH340
• Operating Voltage: 5 V
• Communication Interfaces: USB-B, I²C, UART
• Additional: Includes assembly guide and educational material

Kit Contents:

Arduino Make Your UNO:

• 1× Make Your UNO PCB
• 1× USB-C to serial adapter board
• 7× Resistors 1 kΩ
• 2× Resistors 10 kΩ
• 2× Resistors 1 MΩ
• 1× Diode (1N4007)
• 1× 16 MHz Crystal oscillator
• 4× Yellow LEDs
• 1× Green LED
• 1× Pushbutton
• 1× MOSFET
• 1× LDO voltage regulator (3.3 V)
• 1× LDO voltage regulator (5 V)
• 3× Ceramic capacitors 22 pF
• 3× Electrolytic capacitors 47 µF
• 7× Polyester capacitors 100 nF
• 1× Socket for ATmega328P
• 2× I/O header connectors
• 1× 6-pin male header
• 1× DC barrel jack connector
• 1× ATmega328P microcontroller

Arduino Audio Synth:

• 1× Audio Synth PCB
• 1× Resistor 100 kΩ
• 1× Resistor 10 Ω
• 1× Audio amplifier (LM386)
• 1× Speaker
• 1× Ceramic capacitor 47 nF
• 1× Electrolytic capacitor 47 µF
• 1× Electrolytic capacitor 220 µF
• 1× Polyester capacitor 100 nF
• 4× Pin headers
• 6× Potentiometers 10 kΩ with knobs

Spare Parts:

• 2× Electrolytic capacitors 47 µF
• 2× Polyester capacitors 100 nF
• 2× Ceramic capacitors 22 pF
• 1× Pushbutton
• 1× Yellow LED
• 1× Green LED

Mechanical Parts:

• 5× Standoffs 12 mm
• 11× Standoffs 6 mm
• 5× Nuts
• 2× Screws 12 mm