Product description
2.4/5.0/6.0 GHz tri-band ISM antenna, panel-mounted puck type, waterproof. Suitable for WiFi 6E/WiFi 7, also WiFi/WiFi 4/LPWA/Bluetooth/ZigBee/RFID. Mounted through panel using lock nut. Suitable for vehicle, marine, or stationary applications. Omnidirectional antenna with 3 m LL100 cable and RP-SMA male connector. For transmitters, receivers, or transceivers. Made of UV-stable plastic, designed to withstand long-term exposure to sunlight. Waterproof with IP65 and IP69 ratings (resistant to high-pressure and high-temperature cleaning). Chemical-resistant and impact-resistant. With an operating temperature range of -40 °C to +85 °C, it is suitable for harsh outdoor environments.
Specifications:
- Frequencies (MHz): 2410-2490 / 4920-5925 / 5925-7125
- VSWR: 2.5:1 / 1.5:1 / 2.1:1
- Antenna gain (dBi): 3.5 / 2.9 / 2.9
- Impedance: 50 Ohm
- Max input power: 25 W
- Polarization: linear
- Operating temperature: -40 to +85°C
- Height: 17.5 mm
- Diameter: ø52 mm
- Mounting hole: ø10 mm
- Panel thickness (max): 12 mm
- Enclosure rating: IP65, IP69
- Cable: 3 m LL100
- Connector: RP-SMA male
Useful information about WiFi standards and frequency bands:
- WiFI 1999 - IEEE 802.11b (2.4 Ghz)
- WiFI 2003 - IEEE 802.11g (2.4 Ghz)
- WiFi 4 2009 - IEEE 802.11n (dual band 2.4/5 Ghz)
- WiFi 5 2013 - IEEE 802.11ac (5 Ghz)
- WiFi 6 2019 - IEEE 802.11ax (dual-band 2.4/5 Ghz)
- WiFi 6E 2020 - IEEE 802.11ax (tri-band 2.4/5/6 Ghz)
- WiFi 7 2024 - IEEE 802.11be (tri-band 2.4/5/6 Ghz)
- WiFi 8 2028 - IEEE 802.11bn (tri-band 2.4/5/6 Ghz)
About SMA and RP-SMA:
SMA and RP-SMA (Reverse Polarity SMA) are two common types of coaxial connectors for RF and antenna applications. The difference is in the construction of the center pin:
- SMA male has a protruding pin - female has a receptacle
- RP-SMA male has a receptacle - female has a protruding pin
Important information about wifi routers:
WiFi routers are normally equipped with RP-SMA connectors. Therefore, carefully check which connector your equipment requires before purchasing an antenna or accessories. Please note that it is possible to join a SMA together with a RP-SMA, but there will be no electrical connection.