Product description
2.4/5.0 GHz dual-band ISM antenna, wall-mounted. Suitable for WiFi 4/WiFi 5/WiFi 6, also WiFi/LPWA/Bluetooth/ZigBee/RFID. For indoor installation or outdoor installation under a roof (protected from rain and snow). Made from UV-stable ABS plastic, designed to withstand long-term exposure to sunlight. Not dependent on a ground plane. Omnidirectional antenna with 3 m LL195 cable and RP-SMA connector. For transmitters, receivers or transceivers.
Specifications:
- Frequency range: 2410-2490 MHz / 4920-5925 MHz
- VSWR: 1.5:1 / 1.8:1
- Max antenna gain (dBi): 1.6 / 1.5
- Impedance: 50 Ohm
- Polarization: Linear
- Max input power: 25 W
- Dimensions antenna and wall mount: 186 x 30 x 115 mm
- Dimensions antenna element: 134 x Ø16 mm
- Cable: 3 m LL195
- Connector: RP-SMA male
Useful information about WiFi standards and frequency bands:
- WiFI 1999 - IEEE 802.11b (2.4 Ghz)
- WiFI 2003 - IEEE 802.11g (2.4 Ghz)
- WiFi 4 2009 - IEEE 802.11n (dual band 2.4/5 Ghz)
- WiFi 5 2013 - IEEE 802.11ac (5 Ghz)
- WiFi 6 2019 - IEEE 802.11ax (dual-band 2.4/5 Ghz)
- WiFi 6E 2020 - IEEE 802.11ax (tri-band 2.4/5/6 Ghz)
- WiFi 7 2024 - IEEE 802.11be (tri-band 2.4/5/6 Ghz)
- WiFi 8 2028 - IEEE 802.11bn (tri-band 2.4/5/6 Ghz)
About SMA and RP-SMA:
SMA and RP-SMA (Reverse Polarity SMA) are two common types of coaxial connectors for RF and antenna applications. The difference is in the construction of the center pin:
- SMA male has a protruding pin - female has a receptacle
- RP-SMA male has a receptacle - female has a protruding pin
Important information about wifi routers:
WiFi routers are normally equipped with RP-SMA connectors. Therefore, carefully check which connector your equipment requires before purchasing an antenna or accessories. Please note that it is possible to join a SMA together with a RP-SMA mechanically, but there will be no electrical connection.
