Product description
Electrokit EK036 is a terminal and prototyping board compatible with Arduino UNO R3/R4. The board mounts on top of the UNO and is used for building and testing custom electronic connections and circuits. It features stackable female headers, allowing additional boards to be stacked on top. The prototyping area has pre-tinned plated through-holes for mounting components.
The board has screw terminals for all connections, making it easier to connect sensors, external circuits, and other electronics. The PCB traces between the screw terminals and the UNO board's GPIO pins can be cut on the underside of the board. This makes it possible to use the screw terminals separately or insert custom circuits between the screw terminals and the UNO board's GPIO pins.
In the center, there is a prototyping area with unconnected solder pads for mounting through-hole components. Two longitudinal rows of connections are connected to the UNO board's 5 V and GND. The board also has space for two tactile push buttons, a 3 mm LED, and a surface-mount IC in an SOIC package with up to 16 pins.
Four additional screw terminals, labeled X1–X4, are connected to solder pads near the prototyping area and can be used for custom connections. The board is supplied with screw terminals and stackable female headers.
Specifications:
- Manufacturer: Electrokit
- Model: EK036
- Type: Terminal Proto Shield
- Compatibility: Arduino UNO R3/R4
- Connections: Screw terminals for all GPIO pins
- Additional screw terminals: 4, X1–X4
- Pin pitch: 2.54 mm
- Power connections: 5 V and GND
- Space for push buttons: 2
- Space for LED: 1, 3 mm
- Space for SMD IC: SOIC, up to 16 pins
- GPIO connections: Cuttable PCB traces to the screw terminals
Included:
- 12 x 3-pin screw terminal blocks (not pre-assembled)
- 4 x stackable female headers (not pre-assembled)
