PIC12F675-I/P DIP-8
Art nr: 40361275
Microchip - PIC12F675-I/P
Behöver du hjälp? Vi finns här!
Ring 040-298760 (måndag till fredag 10-16), eller mejla på info@electrokit.se
Produktbeskrivning
Produktbeskrivning
8-bit Microcontroller based on the PIC RISC architecture.
Max CPU operating frequency: 20MHz
Flash: 1024 words
RAM: 64B
EEPROM: 128B
Features
* Internal and external oscillator options
- Precision Internal 4 MHz oscillator factory calibrated to ±1%
- External Oscillator support for crystals and resonators
- 5 µs wake-up from SLEEP, 3.0V, typical
* Power saving SLEEP mode
* Wide operating voltage range - 2.0V to 5.5V
* Low power Power-on Reset (POR)
* Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Brown-out Detect (BOD)
* Watchdog Timer (WDT) with independent oscillator for reliable operation
* Multiplexed MCLR/Input-pin
* Interrupt-on-pin change
* Individual programmable weak pull-ups
* Programmable code protection
* 6 I/O pins with individual direction control
* High current sink/source for direct LED drive
* Analog comparator module with:
- One analog comparator
- Programmable on-chip comparator voltage reference (CVREF) module
- Programmable input multiplexing from device inputs
- Comparator output is externally accessible
* Analog-to-Digital Converter module:
- 10-bit resolution
- Programmable 4-channel input
- Voltage reference input
* Timer0: 8-bit timer/counter with 8-bit programmable prescaler
* Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
* In-Circuit Serial Programming (ICSPTM) via two pins
Max CPU operating frequency: 20MHz
Flash: 1024 words
RAM: 64B
EEPROM: 128B
Features
* Internal and external oscillator options
- Precision Internal 4 MHz oscillator factory calibrated to ±1%
- External Oscillator support for crystals and resonators
- 5 µs wake-up from SLEEP, 3.0V, typical
* Power saving SLEEP mode
* Wide operating voltage range - 2.0V to 5.5V
* Low power Power-on Reset (POR)
* Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Brown-out Detect (BOD)
* Watchdog Timer (WDT) with independent oscillator for reliable operation
* Multiplexed MCLR/Input-pin
* Interrupt-on-pin change
* Individual programmable weak pull-ups
* Programmable code protection
* 6 I/O pins with individual direction control
* High current sink/source for direct LED drive
* Analog comparator module with:
- One analog comparator
- Programmable on-chip comparator voltage reference (CVREF) module
- Programmable input multiplexing from device inputs
- Comparator output is externally accessible
* Analog-to-Digital Converter module:
- 10-bit resolution
- Programmable 4-channel input
- Voltage reference input
* Timer0: 8-bit timer/counter with 8-bit programmable prescaler
* Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
* In-Circuit Serial Programming (ICSPTM) via two pins
Dokument
Egenskaper
Attribut | Värde |
---|---|
ADC
|
4
|
Arkitektur
|
8-bit
|
Kapsel
|
DIP-8
|
Klocka
|
20 MHz
|
EEPROM
|
0.125
|
Familj
|
PIC12
|
Flash
|
1.75
|
GPIO
|
6
|
RAM
|
0.06
|
Matningsspänning (max)
|
5.5 V
|
Matningsspänning (min)
|
2 V
|
Timers
|
2
|
SKU:
40361275MPN:
PIC12F675-I/P