Product description
Fit for light bulbs, halogen on mains and low-mains halogen in combination with a dimmable electronic transformer.
Phase cut-off technology for resistive (light bulbs) and capacitive (dimmable electronic transformers) loads.
Phase cut-off technology for inductive loads (dimmable wound transformers).
Features
Noiseless through CoolMOSIM FET
mains pollution (EMI) conform EN55015
Built-in non-resettable fuse
gradual switch on or off a. will prolong the lamp's life
manual control on the module
control through VELBUS
programmable without PC
16 possible time set-ups: momentary - 5s - 10s - 15s - 30s - 1min - 2 min - 5min - 10min - 15min - 30min - 1u - 2u - 5u - 1day - on/off
controllable by connecting several push buttons in parallel
easy learning process storage space for 16 different push buttons
learned push buttons are saved in case of a power failure
report to control modules LED indicators for: operation modes power voltage
data reception and forwarding through VELBUS
operation modes: moment control
start/stop timer staircase lighting timer
dimmer
simmer with memory function
multi-position dimmer
slow-on dimmer
slow-off dimmer
slow on-off dimmer
control possibilities: push buttons turning on the lamp to full intensity
push buttons turning the lamp off
push buttons turning on the lamp to full intensity or turning off the lamp
push buttons activating the set operation mode
push buttons increasing the lamp's light intensity
push buttons decreasing the lamp's light intensity
push buttons creating atmospheric lighting
push buttons turning on the lamp on the desired intensity.
Specifications
power voltage: 12 ...18VDC
consumption: 40mA
required mains voltage: 100-125V/60Hz of 220-240V/50Hz
maximum load: 300W @ 230V or 150W @ 115V
dimming from 0 to 100% in ca. 4 seconds
248 possible addresses push button input debounce: 65ms
standard DIN-rail housing: 2 modules
dimensions: 90 x 36 x 58mm / 3,6 x 1,44 x 2,32"
weight: 95g (0.21lbs)
Phase cut-off technology for resistive (light bulbs) and capacitive (dimmable electronic transformers) loads.
Phase cut-off technology for inductive loads (dimmable wound transformers).
Features
Noiseless through CoolMOSIM FET
mains pollution (EMI) conform EN55015
Built-in non-resettable fuse
gradual switch on or off a. will prolong the lamp's life
manual control on the module
control through VELBUS
programmable without PC
16 possible time set-ups: momentary - 5s - 10s - 15s - 30s - 1min - 2 min - 5min - 10min - 15min - 30min - 1u - 2u - 5u - 1day - on/off
controllable by connecting several push buttons in parallel
easy learning process storage space for 16 different push buttons
learned push buttons are saved in case of a power failure
report to control modules LED indicators for: operation modes power voltage
data reception and forwarding through VELBUS
operation modes: moment control
start/stop timer staircase lighting timer
dimmer
simmer with memory function
multi-position dimmer
slow-on dimmer
slow-off dimmer
slow on-off dimmer
control possibilities: push buttons turning on the lamp to full intensity
push buttons turning the lamp off
push buttons turning on the lamp to full intensity or turning off the lamp
push buttons activating the set operation mode
push buttons increasing the lamp's light intensity
push buttons decreasing the lamp's light intensity
push buttons creating atmospheric lighting
push buttons turning on the lamp on the desired intensity.
Specifications
power voltage: 12 ...18VDC
consumption: 40mA
required mains voltage: 100-125V/60Hz of 220-240V/50Hz
maximum load: 300W @ 230V or 150W @ 115V
dimming from 0 to 100% in ca. 4 seconds
248 possible addresses push button input debounce: 65ms
standard DIN-rail housing: 2 modules
dimensions: 90 x 36 x 58mm / 3,6 x 1,44 x 2,32"
weight: 95g (0.21lbs)