Product description
Adafruit USB-C PD Trigger HUSB238 with I2C and DIP switches. Adafruit USB-C Power Delivery Trigger is a module that makes it possible to use a USB-C PD charger to power electronics with a selectable output voltage of up to 20 V. The module can deliver up to 5 A and 100 W, provided that the connected USB-C PD power source supports this.
The desired output voltage can be selected using DIP switches directly on the board or controlled via I2C from a microcontroller. Using the DIP switches, the voltage can be set to 5, 9, 12, 15, 18 or 20 V without programming or soldering. With I2C control, the available voltages and currents can be read from the USB-C PD power source, and the output voltage can be selected dynamically.
The module has a USB-C connector for power input and a 2-pin screw terminal for the output voltage. A green LED indicates when the output is active. The LED can be disconnected if needed. There are also solder pads for the USB data lines and the option to connect an external switch to turn off the output.
A Qwiic connector is provided for I2C communication.
Specifications:
- Manufacturer: Adafruit
- Product number: 5991
- Type: USB-C Power Delivery Trigger
- IC: HUSB238 (HUSB328 PDL003A E-Marker variant according to the manufacturer)
- Input: USB-C PD
- Selectable output voltages: 5, 9, 12, 15, 18 and 20 V
- Output current (max): 5 A
- Output power (max): 100 W
- Voltage selection: DIP switches or I2C
- Communication interface: I2C via Qwiic
- Output connection: 2-pin screw terminal
- Indicator: Green LED for active output
- Other connections: Solder pads for USB data lines and external power-off switch
- Dimensions: 29 x 20 x 10 mm
