Product description
Adafruit ANO Rotary Navigation Encoder is a rotary encoder with five integrated push buttons and an I2C interface via Qwiic. The module is designed for user interfaces where rotation and button presses are used to navigate menus, change settings, or control functions in electronics projects. The rotary encoder is pre-mounted on the circuit board and requires no soldering.
The module features a built-in microcontroller with Adafruit's seesaw firmware that registers rotary encoder pulses and button presses. The information can be read via I2C from Arduino, Raspberry Pi, or other compatible microcontrollers. The built-in counter stores the incremental value from the rotary encoder so that it can be read when needed.
A configurable interrupt output (INT) can signal when the rotary encoder is turned or a button is pressed. This makes it possible to detect events without continuously polling via I2C.
The module has four solder jumpers for configuring the I2C address, allowing up to 16 modules to be connected to the same I2C bus. The address can also be changed using a special command and stored in the built-in EEPROM memory. In addition to the Qwiic connectors, there are connections with 2.54 mm pitch for use with breadboards, for example.
The module is supported by Adafruit's libraries for Arduino and CircuitPython/Python.
Specifications:
- Manufacturer: Adafruit
- Product number: 6310
- Type: Rotary encoder with push buttons and I2C interface
- Rotary encoder: ANO Rotary Navigation Encoder
- Number of push buttons: 5
- Supply voltage: 3–5 V DC
- Logic level: 3.3 V or 5 V
- Communication interface: I2C
- I2C address: Configurable via four solder jumpers or software
- Number of modules on the same I2C bus: Up to 16
- Interrupt output: INT, configurable, active low
- Firmware: Adafruit seesaw
- Connection: 2x Qwiic and solder connections with 2.54 mm pitch
- Software support: Arduino, CircuitPython, and Python
- Mounting: Rotary encoder pre-mounted on the circuit board
- Included: Pin header (not pre-mounted)
