Product description
Peristaltic liquid pump for pumping and dosing liquids. The pump operates on 5–6 V DC and has a flow rate of up to 100 ml/min. The peristaltic design means that the liquid only comes into contact with the silicone tubing and not with the mechanical parts of the pump.
The pump uses a geared DC motor that drives a series of rollers. The rollers compress the silicone tubing, moving the liquid through the tube. The pump is self-priming and can draw water from a height of approximately 0.5 m without needing to be filled with liquid first.
The flow rate can be regulated using PWM control of the motor. Reversing the polarity of the motor connections changes the pumping direction. The pump can be controlled using, for example, a power transistor or a motor driver IC such as the L293D, L298, or another DC motor driver.
The pump comes with pre-installed silicone tubing and two connected tubes approximately 0.5 m long each. The included tubing is intended for basic testing only and is not food-grade approved. For use with food or beverages, suitable approved tubing is required.
Specifications:
- Type: Peristaltic liquid pump
- Supply voltage: 5–6 V DC
- Motor current: 500 mA
- Flow rate (max): 100 ml/min
- Self-priming height: Approx. 0.5 m (water)
- Flow control: PWM
- Pumping direction: Reversible by reversing polarity
- Tubing material: Silicone
- Tubing inner diameter: 3 mm
- Tubing outer diameter: 5 mm
- Tubing length: Approx. 500 mm
- Motor diameter: 27.8 mm
- Overall length: 66.8 mm
- Mounting holes: M3 (ø3.2 mm)
- Distance between mounting holes: 50 mm (center-to-center)
- Operating temperature: 0 to +40 °C
- Weight: 104 g