Product description
The ESP32-C6 Mini Development Board is ideal for developing smart home devices, industrial automation, wearable systems and other IoT applications which require reliable wireless communication and low power consumption. The development board is based on the ESP32-C6FH4 chip, a powerful chip with 4MB of flash memory and up to 160MHz clock frequency. The board supports communication standards such as Wi-Fi, Bluetooth LE, Zigbee and Thread, which enables broad compatibility with modern IoT systems.
The ESP32-C6 has a built-in extremely power-efficient LP-CPU with a clock frequency of up to 20MHz. It can handle simple tasks and can run even when the processor is in sleep mode. A dedicated 16KB LP-SRAM will also retain data in sleep mode. Several different low-power modes allow for adaptation to the needs of wireless range, data rates and power consumption for many different applications.
I/O is available on pin headers for easy connection of sensors/peripherals to breadboards, using Dupont cables or direct mounting to PCB.
Supports Wi-Fi 6 (802.11ax), Bluetooth 5.3 LE, Zigbee 3.0 and Thread 1.3
Compatible with ESP-IDF and Arduino IDE.
Features:
- Support for Wi-Fi 6 (802.11ax), Bluetooth 5.3 LE, Zigbee 3.0, and Thread 1.3, enabling broad compatibility with modern IoT standards.
- Equipped with a high-performance 32-bit RISC-V CPU up to 160 MHz and a low-power 32-bit RISC-V CPU up to 20 MHz, providing flexibility between performance and energy efficiency.
- Integrated with 512 KB SRAM and 320 KB ROM, along with an external 4 MB SPI flash for program and data storage.
- Can be powered via USB-C or through 5V/3.3V pin headers, offering flexibility across applications.
- Compatible with ESP-IDF and Arduino IDE, simplifying development and prototyping.
- USB-C connector: For power supply and programming from PC.
Specifications:
- Core: 32-bit RISC-V Single Core
- Frequency: 160 MHz
- Program memory (SRAM): 512 KB
- Flash storage: 4 MB
- Permanent memory (ROM): 320 KB
- GPIO: 20, of which 13 are accessible via pin headers and 7 as solder pads on the back of the board
- Bluetooth version: 5.3 (LE)
- Wi-Fi 6: 802.11 (b/g/n/ax), up to 150 Mbps
- Wi-Fi 4: 802.11 (b/g/n), up to 150 Mbps
- Zigbee and Thread: (802.15.4)
- Supply voltage: 3.3 V or 5 V
- Logic level: 3.3 V
- Integrated 2.4 GHz PCB antenna
Interfaces: GPIO, SPI, parallel IO interface, UART, I²C, I²S, RMT (TX/RX), pulse counter, LED PWM, USB-Serial/JTAG controller, MCPWM, SDIO 2.0 slave controller, GDMA, TWAI controller, on-chip debugging via JTAG, event/task matrix, ADC, temperature sensor, system timer, general-purpose timers, and watchdog timers.
