Product description
The ESP32-C6-Touch-AMOLED-1.64 is a development board featuring the ESP32-C6 and a built-in 1.64-inch touchscreen. The board supports 2.4GHz Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (including Zigbee 3.0 and Thread). The display offers a resolution of 280x456 pixels and 16.7 million colors, utilizing a QSPI interface. The board is equipped with a QMI8658 6-axis IMU, a microSD card slot, USB Type-C, and a connector for a 3.7V Li-Po battery. Development resources and examples for ESP-IDF and Arduino IDE are available.
Specifications:
- Processor: ESP32-C6
- CPU: 32-bit RISC-V single-core
- Low-power processor: 32-bit RISC-V
- Clock frequency: Up to 160 MHz
- Low-power processor clock frequency: Up to 20 MHz
- Wireless communication: 2.4 GHz Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4
- Wireless protocols: Zigbee 3.0 and Thread
- Bluetooth features: Bluetooth LE and Bluetooth Mesh
- ROM: 320 KB
- SRAM: 512 KB HP SRAM
- LP SRAM: 16 KB
- Flash memory: 16 MB
- Display type: AMOLED capacitive touchscreen
- Screen size: 1.64 inches
- Resolution: 280x456 pixels
- Colors: 16.7M
- Brightness: 350 cd/m²
- Contrast ratio: 60000:1
- Display interface: QSPI
- Touch interface: I2C
- Display driver IC: CO5300
- Touch controller: FT6146
- IMU: QMI8658 6-axis IMU
- IMU features: 3-axis accelerometer and 3-axis gyroscope
- Buttons: PWR and BOOT
- Battery connection: PicoBlade (MX1.25) header for 3.7V Li-Po battery
- Storage: MicroSD card slot
- USB: USB-C
- Power options: 3.3V, 5V, Li-Po battery, or USB-C
- Logic level: 3.3V
- USB features: Power supply, Program downloading and debugging
- Interfaces: USB, UART, I2C, and MUX_GPIO
- Development environments: ESP-IDF and Arduino IDE
- Antenna: Built-in antenna with support for an external antenna (U.FL); selectable via solder jumper
- Enclosure: CNC-machined enclosure with edge protection
- Dimensions: 44 x 29.1 x 9.6 mm
- Pin header: Not pre-assembled; included