Product description
Waveshare e-Paper Driver HAT is a universal driver board for Waveshare e-Paper displays with an SPI interface. The board features a 40-pin GPIO connector for direct connection to Raspberry Pi. It can also be used with ESP32, Arduino, Jetson Nano, and STM32 via the separate SPI interface.
An integrated level converter makes the board compatible with both 3.3 V and 5 V logic. Communication with the e-Paper display is via 3-wire or 4-wire SPI. Waveshare provides development resources and examples for Raspberry Pi, Jetson Nano, Arduino, and STM32.
Specifications:
- Manufacturer: Waveshare
- Model: e-Paper Driver HAT
- Type: Driver board for e-Paper displays
- Compatibility: Most Waveshare e-Paper panels with SPI interface
- Supply voltage: 3.3 V / 5 V
- Interface: 3-wire SPI / 4-wire SPI
- GPIO connector: 40-pin, compatible with Raspberry Pi
- Logic levels: 3.3 V / 5 V
- Dimensions: 65.0 x 30.2 mm
- Mounting holes: Ø3.0 mm
SPI connection:
- VCC: 3.3 V / 5 V
- GND: Ground
- DIN: SPI MOSI
- CLK: SPI SCK
- CS: Chip select, active low
- DC: Data/command
- RST: Reset, active low
- BUSY: Status output
- PWR: Power control
Supplied with:
- e-Paper Driver HAT and adapter board
- FFC cable
- Mounting spacers
- Connection cable (9-pin GH1.25 to 9x Dupont female)