Product description
Adafruit SCD-43 is a sensor module for measuring carbon dioxide (CO2), temperature, and humidity. The module is based on the Sensirion SCD-43 and uses photoacoustic measurement technology to measure the actual CO2 concentration in the air, unlike sensors that estimate CO2 levels based on the concentration of volatile organic compounds (VOCs).
The Sensirion SCD43 is an updated and improved version of the SCD40, offering higher measurement accuracy, an extended CO2 measurement range, and support for single-shot measurements.
The sensor has a measurement range of 400–5000 ppm and an accuracy of ±(30 ppm + 3 % of reading). It is suitable for air quality monitoring, ventilation systems, environmental measurements, and scientific experiments. The SCD-43 also supports single-shot measurements.
The module communicates via I2C and features two Qwiic connectors. This allows the sensor to be connected to microcontroller boards and other I2C modules without soldering. Support is available for Arduino and Python/CircuitPython.
The circuit board features a built-in 3.3 V voltage regulator and I2C level shifters, making the module compatible with both 3.3 V and 5 V systems. The regulator also helps provide the sensor with a stable supply voltage with low ripple.
Specifications:
- Manufacturer: Adafruit
- Product number: 6512
- Sensor: Sensirion SCD-43
- Measurement parameters: CO2, temperature, and relative humidity
- CO2 measurement technology: Photoacoustic
- CO2 measurement range: 400–5000 ppm
- CO2 accuracy: ±(30 ppm + 3 % of reading)
- Response time: 60 s
- Current consumption: 17 mA at 5 s measurement intervals, 0.5 mA at 5 min measurement intervals
- Supply voltage: 3.3–5 V DC
- Interface: I2C
- I2C address: 0x62
- Connection: 2 x Qwiic
- Voltage regulator: Built-in 3.3 V
- Level shifters: Built-in for I2C
- Sensor dimensions: 10.1 x 10.1 x 6.5 mm
- Board dimensions: 25.5 x 22.8 x 8.0 mm
- Weight: 2.7 g
