Product description
Electric air pump for pumping air, for example for inflatable structures, pneumatic projects and robotics. The pump is driven by a DC motor with a supply voltage of 4.5-5 V and a current consumption of approximately 600 mA.
The pump draws in air through a connection on the side of the plastic housing and expels it through the connection at the end. The direction of airflow does not change when the motor polarity is reversed. Therefore, two pumps are required to both inflate and deflate, for example, an air cushion.
The pump has an airflow rate of 1.8 l/min and a maximum vacuum pressure of -0.55 bar (-8 psi). The airflow can be regulated using PWM control with, for example, a power transistor or a motor driver circuit such as the L293D, L298 or another DC motor driver.
The pump is not intended for continuous operation. According to the manufacturer's specifications, it has been tested for 30 000 cycles with 10 seconds of operation and 5 seconds of rest.
The pump is intended for air only and cannot be used to pump liquids. Silicone tubing is not included.
Specifications:
- Model: ZR320-02PM
- Type: Electric air pump/vacuum pump
- Supply voltage: 4.5-5 VDC
- Current consumption: Approx. 600 mA
- Airflow rate: 1.8 l/min
- Maximum vacuum pressure: -55 kPa / -0.55 bar / -8 psi
- Airflow control: PWM
- Recommended duty cycle: Approx. 50 %
- Tested lifespan: 30 000 cycles (10 s on, 5 s off)
- Inlet and outlet connections: Outer diameter ø4.1 mm
- Recommended tubing: Inner diameter approx. ø2.5-4 mm
- Motor and pump housing dimensions: 45 x ø27 mm
- Medium: Air only
- Tubing included: No