PIC18F452-I/P DIP-40

8-bit Microcontroller based on the PIC RISC architecture.

Max CPU operating frequency: 40MHz
FLASH: 16k words
RAM: 1536kB
EEPROM: 256B

Features

* High current sink/source 25 mA/25 mA
* Three external interrupt pins
* Timer0 module: 8-bit/16-bit timer/counter with 8-bit programmable prescaler
* Timer1 module: 16-bit timer/counter
* Timer2 module: 8-bit timer/counter with 8-bit period register (time-base for PWM)
* Timer3 module: 16-bit timer/counter
* Secondary oscillator clock option – Timer1/Timer3
* Two Capture/Compare/PWM (CCP) modules. CCP pins that can be configured as:
– Capture input: capture is 16-bit, max. resolution 6.25 ns (TCY/16)
– Compare is 16-bit, max. resolution 100 ns (TCY)
– PWM output: PWM resolution is 1- to 10-bit, max. PWM freq. @: 8-bit resolution = 156 kHz 10-bit resolution = 39 kHz
* Master Synchronous Serial Port (MSSP) module, Two modes of operation:
– 3-wire SPI™ (supports all 4 SPI modes)
– I2C™ Master and Slave mode
* Addressable USART module:
– Supports RS-485 and RS-232
* Parallel Slave Port (PSP) module

* Compatible 10-bit Analog-to-Digital Converter module (A/D) with:
– Fast sampling rate
– Conversion available during SLEEP
– Linearity = 1 LSb
* Programmable Low Voltage Detection (PLVD)
– Supports interrupt on-Low Voltage Detection
* Programmable Brown-out Reset (BOR)

* Self-reprogrammable under software control
* Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
* Watchdog Timer (WDT) with its own On-Chip RC Oscillator for reliable operation
* Programmable code protection
* Power saving SLEEP mode
* Selectable oscillator options including:
– 4X Phase Lock Loop (of primary oscillator)
– Secondary Oscillator (32 kHz) clock input
* Single supply 5V In-Circuit Serial Programming (ICSP) via two pins
* In-Circuit Debug (ICD) via two pins