NE5230NG DIP-8 RRO single op-amp 1.8V

Low Voltage Operational Amplifier

The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which controls the supply current required by the device and thereby controls its power consumption. If the part is operated at +/-0.9V supply voltages, the current required is only 110uA when the current control pin is left open. Even with this low power consumption, the device obtains a typical unity gain bandwidth of 250kHz. When the bias adjusting pin is connected to the negative supply, the unity gain bandwidth is typically 600kHz while the supply current is increased to 600uA. In this mode, the part will supply full power output beyond the audio range. The NE5230 also has a unique input stage that allows the common-mode input range to go above the positive and below the negative supply voltages by 250 mV. This provides for the largest possible input voltages for low voltage applications. The part is also internally-compensated to reduce external component count.

Features

* Works Down to 1.8V Supply Voltages
* Adjustable Supply Current
* Low Noise
* Common-mode Includes Both Rails
* Vout Within 100mV of Both Rails

Applications

* Portable Precision Instruments
* Remote Transducer Amplifier
* Portable Audio Equipment
* Rail-to-Rail Comparators
* Half-wave Rectification without Diodes
* Remote Temperature Transducer with 4.0 to 20mA Output Transmission