Produktbeskrivning
To process a PAL colour video signal it first has to be converted back into the original Red, Green and Blue signals. This allows the colours to be adjusted separately along with the colour intensity, brightness and contrast. Once processed the signal can be converted back into a PAL video signal. The user can choose PAL video or RGB output. In addition space is provided on the PCB for a UHF modulator (our type RFMOD) so you can use the antenna input of your TV or video. An SVHS input signal can also be connected.
Specifications
colour system: PAL (CCIR)
controls for brightness, contrast and saturation
separated controls for Red, Green and Blue
composite video input (RCA-connector)
RGB input (option)
input level: 1Vpp
input impedance: 75 ohm
composite video output (RCA-connector)
RGB-output: 9-pin SUB-D
output level: 1Vpp
output impedance: 75 ohm
RF antenna in/output (in option RFMOD)
housing included
power supply: 16VDC / 0.5A unregulated
PCB dimensions: 170 x 140mm (6.7" x 5.5")
dimensions: 200 x 67 x 170mm (7.9" x 2.6" x 6.7")
Specifications
colour system: PAL (CCIR)
controls for brightness, contrast and saturation
separated controls for Red, Green and Blue
composite video input (RCA-connector)
RGB input (option)
input level: 1Vpp
input impedance: 75 ohm
composite video output (RCA-connector)
RGB-output: 9-pin SUB-D
output level: 1Vpp
output impedance: 75 ohm
RF antenna in/output (in option RFMOD)
housing included
power supply: 16VDC / 0.5A unregulated
PCB dimensions: 170 x 140mm (6.7" x 5.5")
dimensions: 200 x 67 x 170mm (7.9" x 2.6" x 6.7")