Produktbeskrivning
The µUSB-MB5 is a USB to serial (TTL) converter which is simple, cost effective, very small and easy to use. It uses a mini-B type USB connector to connect to your PC and is based on the CP2102 Bridge from Silicon Labs. It provides the user with multi baud rate serial data and access to flow control signals in a convenient 10 pin 0.1" pitch Dual-In-Line package.
The µUSB-MB5 makes an easy USB-Serial interface, so you can easily create USB to RS-232 converters. In any application, make sure the TX and RX lines from the µUSB are crossed over to the attached peripheral. That is, the TX from the µUSB connects to the RX of the target and the RX from the µUSB connects to the TX of the target device.
Please note: The TX and RX signal levels are between 0.0 Volts and 3.3 Volts.
Features:
USB 2.0 compliant 12Mbps maximum speed
Hardware or Xon/Xoff handshaking supported; 300bps to 1Mbps
UART supports 5-8 bit data, 1-2 Stop bits, odd/even and no parity
Integrated EEPROM for Vendor ID, product ID, serial number, release number
On-chip 3.3V regulator available
Virtual COM port drivers allow operation with existing COM port PC applications
Supports Windows, MAC (OSX-9 and above) and Linux (2.4 kernel and above)
Self powered or USB powered
Traffic/Operation LED indicates board status
Dimensions: 15.4x17.7mm
The µUSB-MB5 makes an easy USB-Serial interface, so you can easily create USB to RS-232 converters. In any application, make sure the TX and RX lines from the µUSB are crossed over to the attached peripheral. That is, the TX from the µUSB connects to the RX of the target and the RX from the µUSB connects to the TX of the target device.
Please note: The TX and RX signal levels are between 0.0 Volts and 3.3 Volts.
Features:
USB 2.0 compliant 12Mbps maximum speed
Hardware or Xon/Xoff handshaking supported; 300bps to 1Mbps
UART supports 5-8 bit data, 1-2 Stop bits, odd/even and no parity
Integrated EEPROM for Vendor ID, product ID, serial number, release number
On-chip 3.3V regulator available
Virtual COM port drivers allow operation with existing COM port PC applications
Supports Windows, MAC (OSX-9 and above) and Linux (2.4 kernel and above)
Self powered or USB powered
Traffic/Operation LED indicates board status
Dimensions: 15.4x17.7mm