Produktbeskrivning
The PmodTMP2 is a temperature sensor and thermostat control board built around the Analog Devices ADT7420.
The PmodTMP2 uses an 8-pin connector that allows for communication via I2C, and provides pins to daisy-chain the PmodTMP2 to other I2C devices. The PmodTMP2 also provides two 2-pin headers for selecting the I2C address of the chip, and two 2-pin headers for controlling external devices based upon temperature thresholds defined by the user in software.
Up to 16-bit resolution
Typical accuracy better than 0.25 °C
I2C interface with 4 selectable addresses
240ms continuous conversion time
Programmable overtemperature/undertemperature control pins.
Support for 3.3v and 5v interfaces
No calibration required
Ships with a 10" 4-pin MTE cable
The PmodTMP2 uses an 8-pin connector that allows for communication via I2C, and provides pins to daisy-chain the PmodTMP2 to other I2C devices. The PmodTMP2 also provides two 2-pin headers for selecting the I2C address of the chip, and two 2-pin headers for controlling external devices based upon temperature thresholds defined by the user in software.
Up to 16-bit resolution
Typical accuracy better than 0.25 °C
I2C interface with 4 selectable addresses
240ms continuous conversion time
Programmable overtemperature/undertemperature control pins.
Support for 3.3v and 5v interfaces
No calibration required
Ships with a 10" 4-pin MTE cable