Oscilloskop 200MHz SDS1202X-E

Art.nr: 41015609
Tillverkare: Siglent
Typbeteckning: SDS1202X-E
I lager: 19

Beskrivning

SIGLENTs new SDS1000X-E Series Super Phosphor Oscilloscope is available in one bandwidth, 200 MHz. It has a maximum sample rate of 1 GSa/s and a standard record

length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.The SDS1000X-E series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes

with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).

The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglents latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC,SPI,UART,CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of Siglents new SDS1000X-E cannot be matched anywhere else in this price class.

Key Features

? 200 MHz bandwidth model

? Real-time sampling rate up to 1 GSa/s

? New generation of SPO technology

? Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s(sequence mode)

? Supports 256-level intensity grading and color display modes

? Record length up to 14 Mpts

? Digital trigger system

? Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern

? Serial bus triggering and decode, supports protocols IIC, SPI, UART, RS232, CAN, LIN (Standard)

? Video triggers and supports HDTV

? Low background noise, supports 500 µV / div to 10 V / div voltage scales

?10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print

? Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions

set by the user, with a very small dead time segment to capture the qualifying event.

? History waveform record (History) function, the maximum recorded waveform length is 80,000 frames

? Automatic measurement function on 38 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement

? 1M points FFT

? True measurement and math to all of sample 14M points Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)

? Preset key can be customized for user settings or factory defaults

? Security Erase mode

? High Speed hardware based Pass/ Fail function

? Large 7 inch TFT-LCD display with 800 * 480 resolution

? Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out

? Supports SCPI remote control commands

? Supports Multi-language display and embedded online help

FilerFiler

SpecifikationSpecifikation

Bandbredd 200MHz
Kanaler 2

Kunder som köpte den här köpte ocksåKunder köpte också

  • Raspberry Pi Zero official case

      Raspberry Pi Zero official case
    Den officiella lådan för Raspberry Pi Zero från Raspberry Pi Foundation. Lådan som går i rött och vitt monteras enkelt ihop utan några verktyg och ger ett bra skydd samtidigt som den ger åtkomst till alla anslutningar på kortet. Tre olika lock medföljer, ett utan hål och ett med hål för kamerakort samt ett med hål för GPIO-kontakten. Medföljer gör även en kort sladd för att ansluta kameran till Raspberryn samt 4st gummifötter som gör att lådan inte glider runt.
    Art.nr: 41015525
    I lager: 136 
    69.00

  • Testkabel BNC - 0.64mm hylsor 1.2m

      Testkabel BNC - 0.64mm hylsor 1.2m
    Labbsladd med BNC-kontakt i ena änden och hylsor för 0.64mm stift i andra änden. Lämplig för anslutning mellan Oscilloskop eller annan mätutrustning och stiftlister. * Kabellängd: 1.2m * Fabrikat: Hirschmann
    Art.nr: 41015298
    I lager: 3 
    99.00

  • Testsladdar med krokodil 25mm/30cm 10-pack HQ

      Testsladdar med krokodil 25mm/30cm 10-pack HQ
    Paket med 10st testsladdar i olika färger. Sladdarna har en isolerad krokodilklämma i båda ändarna. Mycket mjuk och följsam ledning. Kabeln är lödd i krokodilklämman. * Kabellängd: 300mm * Krokodilklämmor: 25mm
    Art.nr: 41011550
    I lager: 99 
    39.00

  • Adapter BNC hane - 2x4mm banankontakt hona

      Adapter BNC hane - 2x4mm banankontakt hona
    Övergång från BNC till 2st 4mm banankontakt hona
    Art.nr: 41011198
    I lager: 81 
    25.00

  • Multimeter digital 3 1/2 siffra auto range

      Multimeter digital 3 1/2 siffra auto range
    Prisvärd multimeter med automatisk avkänning av mätområdet. Stor och tydlig display med 3.5-tecken. Kan mäta alla de vanliga storheterna (resistans, spänning, ström) samt kontinuitet, frekvens och temperatur. Levereras med mätsladdar, temperaturprob och batterier. Specifikationer: * Spänning (DC): 0.2V / 2V / 20V / 200V / 600V (±0.5%) * Spänning (AC): 0.2V / 2V / 20V / 200V / 600V (±0.8%) * Impedans: 10Mohm * Ström (DC): 200µA / 2mA / 20mA / 200mA / 10A (±1.0%) * Ström (AC): 200µA / 20mA / 200mA / 10A (±1.5%) * Resistans: 200ohm / 2kohm / 20kohm / 200kohm / 2Mohm / 20Mohm (±0.8%) * Temperatur: -55 till +1000°C (±1.0%) * Övriga mätfunktioner: kontinuitet, diod, * Displaystorlek: 19 x 48mm * Dimensioner: 70 x 145 x 30mm * Vikt: 186g
    Art.nr: 41004356
    Tillfälligt slut
    269.00