Visar 1 till 16 av 16 produkter
  • 1-wire till USB adapter

      1-wire till USB adapter
    Adapter för att kommunicera med 1-wire via USB. Fabrikat: Maxim Typbenämning: DS9490R#
    Art.nr: 41011469
    I lager: 2 

  • EasyUSB 2Mb

      EasyUSB 2Mb
    EasyUSB är en liten modul som ger en ansluten mikrokontroller tillgång till 2Mb lagringsutrymme som dessutom går att komma åt via en dator. Minnet dyker upp som en masslagringsenhet i de flesta operativsystem och man kan läsa och skriva filer precis som ett vanligt USB-minne. Se SDK för mer information. * Filsystem: FAT16 * Minnesstorlek: 2Mb * Matningsspänning: 3 - 5.2V * Baudrate: 9600 - 921600bps * Kapsel: DIP-8
    Art.nr: 41010348
    I lager: 5 

  • ENC28J60-modul

    Modul med ENC28J60 ethernetkontroller OBS! Är ingen shield till arduino
    Art.nr: 41010548
    I lager: 5 

  • Fjärrkontroll 20 knappar med mottagare IR

      Fjärrkontroll 20 knappar med mottagare IR
    Paket med fjärrkontroll och mottagare. Fjärrkontrollen drivs med ett CR2025 knappcellsbatteri (ingår ej) och har 17 knappar. Mottagaren består av en enkel 38kHz IR-mottagare som enkelt kan anslutas till valfri mikrokontroller. Perfekt för fjärrstyrning av robotar och alla möjliga projekt där man vill styra något på några meters avstånd! Batteri beställes separat.
    Art.nr: 41015742
    I lager: 88 

  • FT231X breakout

      FT231X breakout
    Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. This board still brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto-reset any Arduino board that has the reset pin brought out to a 6-pin connector. The coolest thing about the FT231X Breakout is that we have broken out ALL the pins for your use, making this board all the more hackable! It also uses a common microUSB jack. One of the features of this board is a jumper on the back, which allows the VCC output to be configured to either 3.3V or 5V. This board ships default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. It should be noted that the max input of the FT231X is only 3.3V, but it can operate down to 1.8V with external pull-ups and is also 5V tolerant.
    Art.nr: 41011705
    I lager: 9 

  • GSM booster

      GSM booster
    GSM Booster is a pin-compatible replacement for Telit GM862-QUAD module while retaining the same form factor of this popular, yet obsolete module. GSM Booster contains Telits new GL865-QUAD GSM module, MMCX GSM antenna connector, SIM card holder and CSTP 50 pin vertical SMD molex connector (male) for further connection. It can be used on MikroElektronika development boards such as SmartGM862, PICPLC16 v6, AVRPLC16 v6, PICPLC4 v6 or EasyGSM/GPRS GM862. There are four zero-ohm SMD jumpers used to select whether Handsfree (HF) or Handset (MT) audio pins are used. Jumpers are soldered in the HF position by default. SIM card and GSM antenna are not included in the package. Key features Features Telit GL865-QUAD, highly Efficient Quad-band GSM/GPRS class 10 module. Integrated TCP/IP protocol stack. Supports the m2mLOCATE Cell-ID based global-positioning feature. Compliant with eCall EU Directive. Operating Voltage Board operates on 3.3V power supply only. Key Benefits Pin-compatible replacement for Telit GM862-QUAD module. Compatible with existing MikroElektronika PLC and GSM/GPRS dev. boards Supported in all mikroElektronika compilers. Ready-to-use examples save development time.
    Art.nr: 41014259
    I lager: 3 

  • IR-sensor 38kHz skärmad

      IR-sensor 38kHz skärmad
    Mottagare för IR-signaler med 38kHz modulering. Kan användas tillsammans med en IR-sändare och i princip alla IR-fjärrkontroller. Sensorn är skärmad för bättre avstörning och längre räckvidd. Fungerar på avstånd upp till 18m.
    Art.nr: 41015734
    I lager: 55 

  • IR-sändare 38kHz

      IR-sändare 38kHz
    Sändare för IR-signaler med 38kHz modulering. Kan användas tillsammans med en IR-mottagare för att överföra data trådlöst över kortare avstånd. Kan även användas med i princip alla apparater som styrs med en IR-fjärrkontroll.
    Art.nr: 41015733
    I lager: 57 

  • MAX3232 monterad på kort

      MAX3232 monterad på kort
    The 'must have' IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic. We've taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We've also included the necessary 0.1uF charge pump capacitors. Also remember that because the MAX3232 operates at a broader voltage range than the 232 (3 - 5.5V) you can use this on both your 3.3 and 5V projects!
    Art.nr: 41010678
    I lager: 25 

  • MOD-ENC28J60

    Modul med ENC28J60 ethernetkontroller för kopplingsdäck, experimentkort eller utvecklingskort med UEXT-anslutning. Lysdioder för Link och Activity. Modulen kommunicerar via SPI. * Dimensioner: 40 x 24mm
    Art.nr: 41010411
    I lager: 3 


    This little module allows all of our development boards with a UEXT connector to communicate at a short distance with an Infra Red link. There is a sensitive IR receiver on it. FEATURES IR sensitive receiver, allows communication up to 5 meter distance Highly efficient IR LED UART interface over the UEXT connector Open hardware Nominal dimensions: (29 x 18)mm ~ (1.1 x 0.7)"
    Art.nr: 41015822
    I lager: 7 

  • Purpletooth Jamboree Bluetooth audio utvecklingskort

      Purpletooth Jamboree Bluetooth audio utvecklingskort
    This is the PurpleTooth Jamboree a full-function board, designed to provide audio bridge support through the A2DP, HFP, and AVRCP Bluetooth Classic profiles. It includes circuitry for converting single-ended audio inputs and microphones to balanced inputs for the module, and converting the modules balanced audio output to an amplified single-ended signal suitable for line-input and headphones. The PurpleTooth also includes buttons for pairing and sending audio commands to remote devices, battery charge circuitry, and six-pin serial headers pinned out for connecting to either FTDI basic boards or boards like the Arduino Pro, Pro Mini, and LilyPad. Each PurpleTooth Jamboree comes standard with a BC127 Bluetooth module, an extremely competent and easy-to-use dual-mode Bluetooth radio. In command mode, any data coming in on the serial port is treated as commands and will be parsed accordingly by the modules command interpreter. In data mode, any data arriving over the serial port will be directly piped out over the Bluetooth link, assuming that the module is connected to another device using the Serial Port Protocol. The PurpleTooth is equipped with one Mic in / LINE in 3.5mm jack (with additional 4-pin through-hole mic adapters), one Headphone / LINE out 3.5mm jack (with additional 4-pin through-hole L/R speaker adapters), seven button volume, track, play and pair control, serial to micro and FTDI support, and a USB micro port for programming.
    Art.nr: 41012473
    I lager: 1 

  • RS-485 sändare/mottagare

      RS-485 sändare/mottagare
    Modul för kommunikation via RS-485. På kortet finns en MAX485 tranceiver som omvandlar TTL-signaler till differentiella signaler för kommunikation över två trådar. Modulen kan användas för att skapa nätverk mellan två eller fler enheter (upp till 32st) över stora avstånd (upp till ~1km) med hastigheter upp till 35Mbps. * Dimensioner: 44.2 x 14.1 x 14.1mm * Matningsspänning: 5V
    Art.nr: 41016229
    I lager: 100 

  • USB-ISO galvanisk isolator för USB

      USB-ISO galvanisk isolator för USB
    USB-ISO FULL SPEED USB ISOLATOR 1000VDC FOR PROTECTING YOUR PC OR LAPTOP WHILE CONNECTING USB DEVICES WIRED TO HIGH VOLTAGES INFO: USB-ISO is USB Full speed USB 2.0 compliant port isolator with 1000V isolation voltage. This device is very useful as protects your PC computer USB host from overvoltages, ESD shock, it provides 1000VDC isolation and this way you can connect to your PC programmers and debuggers which work directly with targets at high voltages like 220V mains power supply etc. Even if your target is not connected to high voltage, USB-ISO is additional protection for your valuable computer, laptop etc. equipment. FEATURES: USB isolation 1000VDC between USB host and USB device Fully USB 2.0 Compliant Full speed data rate 12 Mbps Bidirectional communication Short-circuit protection for xD+ and xD- lines Class 3A contact ESD performance per ANSI/ESD STM5.1-2007 High common-mode transient immunity: >25 kV/µs USB_DEVICE connector- which is USB-B type and have to be connected to the PC USB host. USB_HOST connector which is USB-A type and have to be connected to the USB device like USB JTAG, programmer, debugger etc Power Jack for external power supply with +8-15VDC, note this power jack is not isolated from the USB_HOST connector DC-DC converter supply isolated voltage to the USB_HOST from the USB_DEVICE if no external power supply is present dimensions 41.5x36.5 mm (1.634x1.437")
    Art.nr: 41010633
    I lager: 2 

  • USB-serielladapter PL2303

      USB-serielladapter PL2303
    Smidig liten USB till TTL seriell adapter, uppbyggd kring PL2303. Kan användas för att skicka och ta emot seriell data (5V signalnivå) via USB. * Dimensioner: 46 x 15 x 11mm * Anslutningar: USB, Tx, Rx, Vcc, Gnd
    Art.nr: 41013077
    I lager: 1 

  • USB-seriellomvandlare BB-CH340T

      USB-seriellomvandlare BB-CH340T
    USB- till seriellomvandlare baserad kring CH340. Ställbar mellan 3.3 och 5V matningsspänning och logiknivå via lödbrygga på kortet. * Omvandlare: CH340T * Utspänning: 3.3V, 80mA / 5V, 450mA * Dimensioner: 25.4 x 26.7mm
    Art.nr: 41013970
    I lager: 3