Inbyggnadslådor för Arduino

Visar 1 till 6 av 6 produkter
Sortering
 
  • Inbyggnadslåda Arduino

      Inbyggnadslåda Arduino
    Inbyggnadslåda i svart plast för Arduino UNO, Arduino MEGA eller annat kort med samma footprint, och en shield. Förberett för RJ-45 kontakten på ethernet shield. Storlek: 87x64x28mm
    Art.nr: 41004842
    I lager: 71 
    99.00

  • Inbyggnadslåda Arduino Uno klar

      Inbyggnadslåda Arduino Uno klar
    The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Arduino Uno from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Uno into the bottom half of the enclosure, then snap the two sides together. As you may have noticed, these enclosures are actually transparent. The enclosures are perfect for letting you see your Arduino Uno and make any needed adjustments easily. The enclosure provides slots to access each header, USB port, power jack, the reset button, the AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design. This is a really durable case that will do a great job protecting your Arduino Uno! Dimensions: 7.8 x 6.1 x 2.1cm
    Art.nr: 41012890
    I lager: 6 
    99.00

  • Inbyggnadslåda Arduino Uno svart

      Inbyggnadslåda Arduino Uno svart
    The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this black opaque plastic enclosure? These cases protect your Arduino Uno from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Uno into the bottom half of the enclosure, then snap the two sides together. As you may have noticed, these Arduino enclosures are actually an opaque black color. The enclosures are perfect for blending your Uno into a black surface, giving your project a sleeker look. The enclosure provides slots to access each header, USB port, power jack, the reset button, the AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design. This is a really durable case that will do a great job protecting your Arduino Uno! Dimensions: 7.8 x 6.1 x 2.1cm
    Art.nr: 41012891
    I lager: 9 
    99.00

  • Inbyggnadslåda för Arduino Yun

      Inbyggnadslåda för Arduino Yun
    Svart inbyggnadslåda för Arduino Yún. Lådan är tillverkad i hållbar ABS/PC och har utskurna hål för alla anslutningar. Lådan monteras enkelt ihop med snäppfästen. * Dimensioner: 87 x 75 x 31mm * Vikt: 41g * Färg: Svart * Material: ABS / Polykarbonat
    Art.nr: 41013782
    I lager: 5 
    99.00

  • Projektlåda för Arduino UNO - rökfärgad

      Projektlåda för Arduino UNO - rökfärgad
    We are very excited to have one of the first (and we think the best) Enclosure for Arduino & project box now available in gray translucent plastic, the future! Here are all the details: Dimensions: 3.6" x 5" x 1.35" Injection molded gray translucent plastic Enclosure is easy to machine, drill, cut and shape to what you need Brass screw inserts (can be used and reused many times, very durable!) Fits standard Arduinos and 16 x 2 LCDs Fits Arduino with Adafruit Protoshield on top with .45" clearance Pop out plates for GPS, buttons, sensors, switches, knobs, etc! Holds up to 4 AAA batteries internally using 2xAAA holders. AA's can squeeze in but the case wont close nicely so we suggest AAA's Comes with screws for the LCD, Arduino and case Made in Canada! Comes with all parts shown. 91mm x 126mm x 34mm
    Art.nr: 41015398
    I lager: 3 
    199.00

  • Projektlåda för Arduino UNO - transparent

      Projektlåda för Arduino UNO - transparent
    We are very excited to have one of the first (and we think the best) Enclosure for Arduino & project box now available in clear plastic, the future! Here are all the details: Dimensions: 3.6" x 5" x 1.35" Injection molded clear plastic Enclosure is easy to machine, drill, cut and shape to what you need Brass screw inserts (can be used and reused many times, very durable!) Fits standard Arduinos and 16 x 2 LCDs Fits Arduino with Adafruit Protoshield on top with .45" clearance Pop out plates for GPS, buttons, sensors, switches, knobs, etc! Holds up to 4 AAA batteries internally using 2xAAA holders. AA's can squeeze in but the case wont close nicely so we suggest AAA's Comes with screws for the LCD, Arduino and case Made in Canada! Comes with all parts shown. 91mm x 126mm x 34mm
    Art.nr: 41015397
    I lager: 4 
    199.00