Gyroskopiska sensorer

Visar 1 till 2 av 2 produkter
  • L3GD20H 3-axels gyroskop

      L3GD20H 3-axels gyroskop
    Adapterkort med ett L3GD20H 3-axels gyroskop. Gyroskop används för att mäta roterande rörelser och kombineras ofta med en accelerometer för att mäta rörelse och position. Gyroskopet kommunicerar via I2C och har en ställbar känslighet. * Känslighet: ±250, ±500, ±2000dps * Matningsspänning: 3 - 5V * I2C-adress: 0x6B * Dimensioner: 30.65 x 19.11 x 3mm * Vikt: 2.02g 41013309
    I lager: 5 

  • Triple Axis Accelerometer & Gyro Breakout - MPU-6050

      Triple Axis Accelerometer & Gyro Breakout - MPU-6050
    The MPU-6050 is a serious little piece of motion processing tech! By combining a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. Our breakout board for the MPU-6050 makes this tiny QFN package easy to work into your project. Every pin you need to get up and running is broken out to 0.1" headers, including the auxiliary master I2C bus which allows the MPU-6050 to access external magnetometers and other sensors. Features: I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format Input Voltage: 2.3 - 3.4V Selectable Solder Jumpers on CLK, FSYNC and AD0 Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g Digital Motion Processing (DMP) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection Embedded algorithms for run-time bias and compass calibration. No user intervention required Digital-output temperature sensor Dimensions: 26x15mm 41010323
    I lager: 3