Timing belt XL 3/8" 508mm

Part.no: 41015807
In stock: 8


These 3/8 wide, 1/5 pitch (5.08mm) XL series timing belts are constructed of Neoprene with fiberglass cords for superior strength and wear resistance. The belts are directly compatible with our XL series pinion pulleys and XL series hub pulleys.


Timing Belt Type: Single-Sided with Trapezoidal Teeth

Timing Belt Series: XL Series

Width: 3/8

Pitch: 1/5"

Color: Black

Material: Neoprene with Fiberglass cords

Thickness 0.375", 3/8"

Belt Trade Size XL (1/5")

Customers Who Bought This Item Also BoughtCustomers Also Bought

  • Timing belt pulley XL 60T 1" 3.80"

      Timing belt pulley XL 60T 1" 3.80"
    Shaft-mountable aluminum timing pulley for XL timing belts. The disc can be mounted to other Actobotics componets with 1.5" hub pattern. Pitch: 1/5T Teeth count: 60 Hub pattern: 1.50" Outer diameter: 96.52mm (3.80") Bore: 25.4mm (1") Belt width: 9.525mm (3/8")
    Part.no: 41015851
    In stock: 3 

  • Timing belt pulley XL 10T 6mm

      Timing belt pulley XL 10T 6mm
    Shaft-mountable aluminum timing pulley for XL timing belts. Pitch: 1/5T Teeth count: 10 Outer diameter: 15.24mm (0.6") Bore: 6mm (0.236") Belt width: 9.525mm (3/8")
    Part.no: 41012369
    Currently not in stock

  • DC-motor geared 60rpm 6V

      DC-motor geared 60rpm 6V
    DC-motor with gearbox for higher torque. The axle spins at 70rpm at 6V without load. Max torque 1kg/cm (0.1nm).
    Part.no: 41004041
    In stock: 25 

  • Light sensor module

      Light sensor module
    Module with a light-dependent resistor that can be used as a simple light sensor where the amount of light determines the output voltage. Can be connected directly to an analog input on a microcontroller. Please note that the light/voltage relation is non-linear and can not be used for exact light measurements.
    Part.no: 41015727
    In stock: 129 

  • Servo MSR-1.3-9 360°

      Servo MSR-1.3-9 360°
    Continous rotation servo in micro form factor. Several different servo arms are included. Specifications: * Output spline: * Size: 23.2 x 12.5 x 22mm / sub-micro * Speed: 0.12s / 60° (4.8V), 0.1s / 60° (6V) * Torque: 1.3kg/cm (18.09oz/in) / 4.8V * Rotation: 360° * Voltage: 4.8 - 6.0V * Pulse width: 900 - 2100uS
    Part.no: 41013137
    In stock: 97 

  • HS-422 standard servo 0.4Nm

      HS-422 standard servo 0.4Nm
    Standard sized servo from Hitec, model HS-422. Specifications: Output spline: Hitec C1 Size: 40.6 x 19.8 x 36.6mm / standard Weight: 45.5g Speed: 0.21s (0.16s) / 60° @ 4.8V (6.0V) Torque: 3.3kg/cm (4.1kg/cm) @ 4.8V (6.0V) Rotation: 180° Voltage: 4.8 - 6.0V Contents: 1x HS-422 Servo 1x Circle Horn 1x Double Arm Horn 1x Single Arm (w/ Slide Bracket) Horn 1x Four Point Horn 4x Rubber Grommets 4x 2x15mm Phillips Screw 4x Brass Eyelets
    Part.no: 41002565
    In stock: 16