Snap-circuits 6SCS1 slide switch

Part.no: 10119907
In stock: 48

Description

Customers Who Bought This Item Also BoughtCustomers Also Bought

  • Snap-circuits 6SCR2 resistor 1 kohm

      Snap-circuits 6SCR2 resistor 1 kohm
    Part.no: 10119908
    In stock: 100 
    Buy
    $3.13

  • Adafruit Pro Trinket 3V 12MHz

      Adafruit Pro Trinket 3V 12MHz
    Trinket's got a big sister in town - the Pro Trinket 3V! Pro Trinket combines everything you love about Trinket with the familiarity of the core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in. Trinket's a year old now, and while its been great to see tons of tiny projects, sometimes you just need more pins, more FLASH, and more RAM. That's why we designed Pro Trinket, with 18 GPIO, 2 extra analog inputs, 28K of flash, and 2K of RAM. Like the Trinket, it has onboard USB bootloading support - we opted for a MicroUSB jack this time. We also added Optiboot support, so you can either program your Pro Trinket over USB or with a FTDI cable just like the Pro Mini and friends. The Pro Trinket PCB measures only 1.5" x 0.7" x 0.2" (without headers) but packs the same capability as an Arduino UNO. So it's great once you've finished up a prototype on an official Arduino UNO and want to make the project smaller. The Pro Trinket 3V uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. However, it uses 3V logic and 12MHz clock which means it's good when you want a lower-power and lower-voltage setup. Pro Trinket is programmable using the Arduino IDE as you already set up, and 95% of Arduino projects will work out of the box! Here's some things you may have to consider when adapting Arduino sketches: Pins #2 and #7 are not available (they are exclusively for USB) The Pro Trinket 3V runs at 12MHz, this doesn't affect most projects. Only the most timing-specific libraries may be affected, check the documentation! The NeoPixel Library works fine at 12MHz. The onboard power supply is a 3.3V regulator and it can provide 150mA output You cannot plug shields directly into the Pro Trinket There is no Serial-to-USB chip onboard. This is to keep the Pro Trinket small and inexpensive, you can use any FTDI cable to connect to the FTDI port for a Serial connection. The USB connection is for uploading new code only. The bootloader on the Pro Trinket use 4KB of FLASH so the maximum sketch size is 28,672 bytes. The bootloader does not affect RAM usage. Here's some handy specifications: ATmega328P onboad chip in QFN package running at 3.3V logic 12MHz clock rate, 28K FLASH available USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude and/or the Arduino IDE (with a few simple config modifications). Also has headers for an FTDI port for reprogramming Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram. On-board 3.3V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection. Power with either USB or external output (such as a battery) - it'll automatically switch over On-board green power LED and red pin #13 LED Reset button for entering the bootloader or restarting the program. Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7) Mounting holes! Yeah!
    Part.no: 41013598
    In stock: 35 
    Buy
    $13.13

  • Storage box 230 x 150 x 33mm 15 compartments

      Storage box 230 x 150 x 33mm 15 compartments
    Storage box for small components with snap-lock. The box has 15 compartments (6x 35 x 45 x 28mm, 2x 109 x 46 x 28mm, 3x 69 x 36 x 28mm). Components sold separately.
    Part.no: 41013459
    In stock: 23 
    Buy
    1 - $6.63
    24 - $4.97

  • Fan 40x40x10mm 12V 100mA 6000rpm

      Fan 40x40x10mm 12V 100mA 6000rpm
    Specifications size (A x A x B): 40 x 40 x 10mm bearing: sleeve rated voltage: 12Vdc airflow: 12m³/hr current: 0.1A speed: 6000rpm noise (at 1m): 25dBA connection: leads weight: 14g material: plastic operating temperature: -20°C to +40°C
    Part.no: 41004816
    In stock: 32 
    Buy
    1 - $2.77
    10 - $2.49
    25 - $2.08

  • Concentration game "threadgame"

      Concentration game "threadgame"
    The aim of this game is to guide a loop of metal through a bent piece of wire. If the loop touches the wire, the speaker makes a noise and the game is over. A simple and fun kit for all ages! * Supply voltage: 3VDC * Dimensions: 81 x 28.4mm
    Part.no: 12100145
    In stock: 41 
    Buy
    1 - $8.31
    10 - $7.48

  • Male header 2x5p SMD

      Male header 2x5p SMD
    Pin header for surface mounting for applications when a small header is needed. The connector has 2x5 poles with a 1.27mm pitch, Manufacturer: Harwin Type: M50-3600542 Current (nom): 1A
    Part.no: 41011811
    In stock: 15 
    Buy
    1 - $1.93
    10 - $1.73
    25 - $1.45