RFDuino

Showing 1 to 9 of 9 matching products
Sort by
 
  • RFDuino - USB Shield

      RFDuino - USB Shield
    This is the RFduino USB shield, a small add-on board that plugs into any USB port and is used to load your sketches onto an RFduino module. This shield can also be attached to any solderless breadboard with the RFduino DIP plugged on top or even below it for better ease of use. Once your code is loaded onto the RFduino, this USB Shield can be detached! On-board the RFduino USB Shield is a 3.3V regulator which can be used to supply power to the RFduino DIP module as well as other shields and possibly the rest of your circuit. Note: This shield is required to load code onto your RFduino. Features: FT231XQ-R USB Controller Max Current: 500mA Serial Interface: RX, TX, RESET
    Part.no: 41013373
    In stock: 2 
    Buy
    279.00

  • RFDuino - RGB/Button Shield

      RFDuino - RGB/Button Shield
    This is the RGB/Button Shield for RFduino, a small add-on board for the RFduino DIP module. Just as its name suggests, this little board is equipped with two pushbuttons and an RGB LED. This shield can be easily attached above or below any other RFduino product and will work perfectly with the RFduino Colorwheel and RFduino LEDButton iOS apps (both found in the Documents section below). Both button inputs on the RGB/Button Shield offer 10k resistor pull downs. This shield, when used in conjunction with the RFduino DIP and USB Shield boards can create a very easy project for beginners!
    Part.no: 41013374
    In stock: 1 
    Buy
    149.00

  • RFDuino - Servo Shield

      RFDuino - Servo Shield
    This is the RFduino Servo Shield, a small board that can be used with the RFduino DIP module to drive up to 4 servos at once. This pretty much as small as servo controllers get even when attached to the RFduino DIP board. With this shield and the RFduino Servo iOS app you will actually be able to wirelessly control your servos! This shield does require that you supply it with 5-6VDC power for the servos, this does not include the 3V needed to operate the RFduino interface. Features: Input Voltage: 6VDC Max 4 Servo Outputs
    Part.no: 41013375
    In stock: 2 
    Buy
    179.00

  • RFDuino - Single AAA Battery Shield

      RFDuino - Single AAA Battery Shield
    This is the RFduino Single AAA Battery Shield, a long add-on board for the RFduino DIP module that supplies 3.3V to your whole project. This shield can easily attach anywhere on your RFduino stack and will still be able to provide reliable power throughout each board. The Single AAA Battery Shield is also equipped with a power switch and a step-up switching regulator which allows the 1.5V battery to be drained down to low voltages while still providing a stable 3.3V to your RFduino. Note: AAA batteries are NOT included with this shield but can be found in the Recommended Products section below. Features: Output Voltage: 3.3V Output Current: 40mA
    Part.no: 41013378
    In stock: 4 
    Buy
    239.00

  • RFDuino - MicroSD Shield

      RFDuino - MicroSD Shield
    This is the RFduino MicroSD Shield, a tiny add-on board that provides you with a means to read and write to microSD cards with your RFduino. This little shield allows you to be able to access gigabytes worth of external memory and removes one of the few drawbacks of the main RFduino board. Like the rest of the RFduino product line this shield can attach anywhere on your stack and still provide you with a reliable connection. The MicroSD Shield requires a supply voltage of 3.0-3.3V and has a max current draw of 100mA at its peak. Note: Due to this current draw be sure not to use the CR2032 Battery Shield with the MicroSD Shield attached. Features: Supply Voltage: 3.0-3.3V Max Current Draw: 100mA (peak)
    Part.no: 41013380
    In stock: 1 
    Buy
    179.00

  • RFDuino - Relay Shield

      RFDuino - Relay Shield
    This is the RFduino Relay Shield, a beefy add-on board that allows your RFduino to control higher voltage and current loads through 2 relays. This shield provides great support of RFduino projects that require high power consumption or distribution. Like the rest of the RFduino product line this shield can attach anywhere on your stack and still provide you with a reliable connection. The Relay Shield provides two SPDT, independently controlled relays with a max voltage and current of 12VDC at 1A. Features: Max Voltage: 12VDC Max Current: 1A 2 SPDT Relay Outputs
    Part.no: 41013381
    In stock: 2 
    Buy
    299.00

  • RFDuino - PCB USB

      RFDuino - PCB USB
    This is the RFduino PCB USB Shield, a small add-on board that plugs into any USB port and is used to load your sketches onto an RFduino module. This shield is almost identical to the RFduino USB Shield and provides the same basic function. The PCB USB Shield can be attached to any solderless breadboard with the RFduino DIP plugged on top or even below it for better ease of use. Once your code is loaded onto the RFduino, this USB Shield can be detached! On-board the RFduino PCB USB Shield is a 3.3V regulator which can be used to supply power to the RFduino DIP module as well as other shields and possibly the rest of your circuit. Note: This board or the PCB Shield are required to load code onto your RFduino. Features: FT231XQ-R USB Controller Max Current: 500mA Serial Interface: RX, TX, RESET
    Part.no: 41013504
    In stock: 3 
    Buy
    269.00

  • Simblee Starter Kit

      Simblee Starter Kit
    This is the Simblee Starter Kit, a great trio of products in one box to help you get you started with and teach you the basics of Simblee. Inside this kit you will find three boards, the Simblee DIP mainboard, the USB programming shield, and the RGB LED/Button shield. When attached, the Simblee mainboard and the USB programming shield will be able to connect to the USB port on your computer and get your code through the Arduino IDE onto the RFduino DIP board. Add in the RGB LED/Button shield to give you a few simple inputs and outputs. The Simblee is a Bluetooth 4.0 Low Energy BLE RF Module with Built-In ARM Cortex-M0 for rapid development and prototyping projects. The Simble operates at 3.3V and only uses 10mA in RX mode ( With this kit you wont need to worry about buying the USB shield separately, its all in one box and ready to be used right away! Note: The custom user interface requires a smartphone app. The app is currently available for iOS and should be available for Android in early 2016.
    Part.no: 41014832
    In stock: 2 
    Buy
    899.00

  • Simblee - DIP

      Simblee - DIP
    The Simblee 7-pin DIP board is a finger-tip sized, Arduino compatible, wireless enabled microcontroller. What makes the Simblee great is the fact that it not only runs Arduino code and can do everything an Arduino can but it also allows you to define a User Interface for your smartphone in the Arduino code. When used in conjunction with the RFduino USB shield, simply plug the RFduino into a USB port of any computer and use the Arduino IDE to load your Arduino sketch, which automatically begins running on the Simblee board. Then you can detach the RFduino USB shield and plug the Simblee directly into your project. Its that easy! The Simblee is a Bluetooth 4.0 Low Energy BLE RF Module with Built-In ARM Cortex-M0 for rapid development and prototyping projects. The Simble operates at 3.3V and only uses 10mA in RX mode ( Note: The Simblee board requires USB Shield for programming. Note: The custom user interface requires a smartphone app. The app is currently available for iOS and should be available for Android in early 2016. Operating Voltage: 3V (Max 3.6V, Low 1.8V) Transmit/Recieve Current: 8-16mA ( ARM Cortex M0 processor (running at 16MHz) 128KB Flash 24KB RAM Build iPhone and Android apps without Xcode or the Android SDK Built in AES encryption engine -93dBm receiver sensitivity -55dBm to +4dBm TX power 7 GPIO pins (6 with 10-bit Analog input) PWM, UART, SPI, I2C capabilites on most GPIO pins UART Programming over USB or Over the Air Programming CE, ETSI, IC, TELEC, and FCC approved
    Part.no: 41014849
    In stock: 2 
    Buy
    349.00