Product description
INTRODUCTION:
A13-OLinuXino is Low Cost Single Board Linux computer in very compact nano-ITX form. It uses the first Cortex A8 available in eLQFP176 package the Allwinner Technology Inc A13.
FEATURES:
A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
512 MB RAM
6-16VDC input power supply, noise immune design
3 + 1 USB Host, 3 available for users 1 for (optional) WIFI RTL8188CU 802.11n 150Mbit module on board
1 USB OTG which can power the board
SD-card connector for booting the Linux image
(optional) 4GB NAND flash
VGA video output
LCD signals available on connector so you still can use LCD if you diasble VGA/HDMI
Audio Output
Audio Input
RTC PCF8536 on board for real time clock and alarms
5 Keys on board for android navigation
UEXT connector for connecting addtional UEXT modules like Zigbee, Bluetooth, Relays, etc
GPIO connector with 68/74 pins and these signals : 17 for adding NAND flash; 22 for connecting LCDs; 20+4 including 8 GPIOs which can be input, output, interrupt sources; 3x I2C; 2x UARTs; SDIO2 for connectinf SDcards and modules; 5 system pins: +5V, +3.3V, GND, RESET, NMI
(Optional low cost 7" LCD with touchscreen)
Note: THIS BOARD IS NOW IN REV-B (DEVELOPER EDITION DEDICATED FOR EARLY DEVELOPERS ONLY) THE SOFTWARE SUPPORT IS NOT PERFECT ESPECIALLY VGA VIDEO
A13-OLinuXino is Low Cost Single Board Linux computer in very compact nano-ITX form. It uses the first Cortex A8 available in eLQFP176 package the Allwinner Technology Inc A13.
FEATURES:
A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
512 MB RAM
6-16VDC input power supply, noise immune design
3 + 1 USB Host, 3 available for users 1 for (optional) WIFI RTL8188CU 802.11n 150Mbit module on board
1 USB OTG which can power the board
SD-card connector for booting the Linux image
(optional) 4GB NAND flash
VGA video output
LCD signals available on connector so you still can use LCD if you diasble VGA/HDMI
Audio Output
Audio Input
RTC PCF8536 on board for real time clock and alarms
5 Keys on board for android navigation
UEXT connector for connecting addtional UEXT modules like Zigbee, Bluetooth, Relays, etc
GPIO connector with 68/74 pins and these signals : 17 for adding NAND flash; 22 for connecting LCDs; 20+4 including 8 GPIOs which can be input, output, interrupt sources; 3x I2C; 2x UARTs; SDIO2 for connectinf SDcards and modules; 5 system pins: +5V, +3.3V, GND, RESET, NMI
(Optional low cost 7" LCD with touchscreen)
Note: THIS BOARD IS NOW IN REV-B (DEVELOPER EDITION DEDICATED FOR EARLY DEVELOPERS ONLY) THE SOFTWARE SUPPORT IS NOT PERFECT ESPECIALLY VGA VIDEO