Pmod

Showing 1 to 50 of 70 matching products
Sort by
 
  • Pmod 1x6p cable 120mm

      Pmod 1x6p cable 120mm
    This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards. Features: 6" length Designed for use with Digilent peripheral modules Can be used to send FPGA signals to an outside device Greater flexibility when connecting your 6-pin Pmod to a host board Uses the standard 100mil spaced 25mil square connector
    Part.no: 41014806
    In stock: 21 
    Buy
    $9.04

  • Pmod 1x6p cable 150mm

      Pmod 1x6p cable 150mm
    This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards. Features: 6" length Designed for use with Digilent peripheral modules Can be used to send FPGA signals to an outside device Greater flexibility when connecting your 6-pin Pmod to a host board Uses the standard 100mil spaced 25mil square connector
    Part.no: 41014805
    In stock: 25 
    Buy
    $5.78

  • Pmod 2x6p cable 180mm

      Pmod 2x6p cable 180mm
    Designed to connect a 12-pin Pmod to a 12-pin system board connector Can be used to send Digilent System board signals to and from outside devices Uses standard 100mil-spaced 25mil square connectors 7" (18mm) in length
    Part.no: 41011606
    Currently not in stock
    Buy
    $6.63

  • Pmod 6p cable 15cm

      Pmod 6p cable 15cm
    designed for use with Digilent peripheral modules can be used to send FPGA signals to an outside device 6-pin connectors are standard 100mil spaced 25mil square connectors allow signals to be routed to and from an FPGA on a Digilent system board
    Part.no: 41011607
    In stock: 11 
    Buy
    $3.49

  • Pmod 6p cable 45cm

      Pmod 6p cable 45cm
    designed for use with Digilent peripheral modules can be used to send FPGA signals to an outside device 6-pin connectors are standard 100mil spaced 25mil square connectors allow signals to be routed to and from an FPGA on a Digilent system board
    Part.no: 41011608
    In stock: 5 
    Buy
    $4.70

  • Pmod 8LD - 8x LED

      Pmod 8LD - 8x LED
    The Pmod8LD has eight high-bright LEDs that are driven by logic-level transistors so each LED can be illuminated with a logic high signal that provides less than 1mA of current. Eight logic level inputs Eight high bright green LEDs Small size (0.80" x 1.10") Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010122
    In stock: 3 
    Buy
    $15.91

  • Pmod ACL - ADXL345 Accelerometer 3-axel

      Pmod ACL - ADXL345 Accelerometer 3-axel
    The PmodACL is a 3-axis digital accelerometer module powered by the Analog Devices ADXL345. It uses a standard 12-pin Pmod connector and can communicate via SPI or I2C. A pull-up resistor on the ~SS line keeps the ADXL345 in I2C mode unless the host drives the line low, in which case the device will communicate via SPI. SPI and I2C interfaces User-selectable resolution Single tap/double tap & free-fall detection Activity/inactivity monitoring Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010106
    In stock: 2 
    Buy
    $38.20

  • Pmod AD1 - AD7476A AD-omvandlare 2ch

      Pmod AD1 - AD7476A AD-omvandlare 2ch
    The Analog to Digital Module Converter Board (the AD1) converts signals at a maximum sampling rate of one million samples per second, fast enough for the most demanding audio applications. The AD1 uses a 6-pin header connector, and at less than one square inch is small enough to be located at the signal source. Two 2-pole Sallen-Key anti-alias filters Two simultaneous A/D conversion channels at up to one MSa per channel Very low power consumption Small size (0.95" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010091
    In stock: 3 
    Buy
    $48.07

  • Pmod AD2 - AD7991 AD-omvandlare 4ch

      Pmod AD2 - AD7991 AD-omvandlare 4ch
    The PmodAD2 is an analog to digital converter module with up to 4 channels at 12-bit resolution powered by the Analog Devices AD7991. It uses an 8-pin connector that allows communication via I2C. The PmodAD2 also has a 6-pin connector that allows up to 4 analog inputs or up to 3 analog inputs and a voltage reference. Up to 4 analog to digital converter channels Up to 12-bit resolution I2C interface On-board 2.048V Voltage Reference Ability to choose the reference voltage Ships with a 4-pin MTE cable
    Part.no: 41010137
    In stock: 3 
    Buy
    $38.20

  • Pmod AMP2 - SSM2377 Klass-D förstärkare 2.5W

      Pmod AMP2 - SSM2377 Klass-D förstärkare 2.5W
    The PmodAMP2 amplifies low power audio signals to drive a monophonic output. The module features a digital gain select that allows output at 6 dB and 12 dB with pop-andclick suppression. A Digilent 6-pin connector provides the audio input to the module and a 1/8-inch mono jack supplies the speaker output. Analog Devices SSM2377: Filterless, High Efficiency, Mono 2.5 Watt Class-D Audio Amplifier Digital gain select Pop and-click suppression Micropower shutdown mode 1/8-inch mono speaker jack A 6-pin header for input 2.5V 5V operating voltage
    Part.no: 41011580
    In stock: 9 
    Buy
    $23.98

  • Pmod BB - Experimentkort och kopplingsdäck

      Pmod BB - Experimentkort och kopplingsdäck
    The Pmod Breadboard provides a ready made solution for prototyping breadboarded circuits using the Digilent 2x6 pin interface. The PmodBB provides for direct connection of numerous Digilent system and microcontroller boards. 266 tie point wire wrap area Ships with a 170 tie point bread board All signals pass through Small size (1.5" x 3.5") Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010119
    In stock: 7 
    Buy
    $27.59

  • Pmod BMP085 - Barometrisk tryckgivare

      Pmod BMP085 - Barometrisk tryckgivare
    BMP085 is barometric pressure digital sensor which measures pressure in range 300..1100hPa (+9000m .. -500m above sea level) BMP085 is with I2C interface and can connect to any board with UEXT
    Part.no: 41013357
    In stock: 6 
    Buy
    $16.75

  • Pmod BT2 - RN-42 Bluetoothmodul

      Pmod BT2 - RN-42 Bluetoothmodul
    The PmodBT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. The PmodBT2 uses a standard 12-pin connection and communicates via UART. There is a secondary SPI header on the board for updating the RN-42 firmware if needed. Bluetooth 2.1/2.0/1.2/1.1 Compatible A wide range of modes including: Slave Mode, Master Mode, Trigger Master Mode, Auto-connect Master Mode, Auto-connect DTR Mode, and Auto-connect ANY Mode. Simple UART Interface Small size: (0.8" x 1.5") Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers. Note: There are two UART signal pin assignment conventions in use on Digilent products. This product uses the new signal assignment convention. Connecting a product using the new convention with one using the old convention requires the use of a UART Crossover Cable (not included). Click here for a more detailed explanation.
    Part.no: 41010131
    In stock: 2 
    Buy
    $58.36

  • Pmod BTN - 4x tryckknappar

      Pmod BTN - 4x tryckknappar
    The Digilent PmodBTN Pushbutton Module Board allows four momentary pushbuttons to be added to any system board using a 6-pin header connector. Four debounced momentary pushbutton switches Small size (1.20" x 0.80") Ships with a 6" 6-pin cable and a 6-pin heade
    Part.no: 41010097
    In stock: 2 
    Buy
    $15.91

  • Pmod CLIP - Fästclip

      Pmod CLIP - Fästclip
    Useful for securely attaching a Pmod to your project or application Works with any Pmod 0.80" in width Can also accomodate a Cerebot Nano Ships with 8-32 nut & screw
    Part.no: 41011609
    In stock: 12 
    Buy
    $1.20

  • Pmod CLP - 16x2 LCD

      Pmod CLP - 16x2 LCD
    The PmodCLP is a 16x2 character LCD module that uses two Pmod connectors to present a 3.3V, 8-bit parallel data interface to system boards. It is based on a Sunlike LCD panel that uses a Samsung KS0066 (or equivalent) LCD controller. The module can be attached to any number of Digilent system boards to create a character LCD subsystem. NOTE: Revision A of the PmodCLP requires 5V for proper operation. This requires that the Pmod Headers used on the Digilent System board be set to 5V0 and not 3V3. All other Revisions utilize 3V3. 16x2 character display Parallel data interface Simple terminal like display interface Measures 3.3" x 2.3" Ships with a 6" 6-pin cable, a 6" 2x6-pin to dual 6-pin cable, and appropriate headers
    Part.no: 41010120
    In stock: 10 
    Buy
    $37.13

  • Pmod CLS - 16x2 LCD seriell

      Pmod CLS - 16x2 LCD seriell
    The PmodCLS module can be used to display important debugging information during program development or as a user interface for completed designs. The module is ideally suited for projects built on Digilent embedded control boards, but can also be used with our FPGA-based boards. Note: There are two UART signal pin assignment conventions in use on Digilent products. This product uses the old signal assignment convention. Connecting a product using the old convention with one using the new convention requires the use of a UART Crossover Cable (not included). 16x2 Character Display Flexible communications using UART, SPI or TWI interface Simple terminal-like display interface Measures 3.75" x 1.75" Ships with a 6" 6-pin cable, and a 6-pin header
    Part.no: 41010103
    In stock: 3 
    Buy
    $37.13

  • Pmod CON1 - 4x skruvplintanslutningar

      Pmod CON1 - 4x skruvplintanslutningar
    The Digilent PmodCON1Module Board is designed for use with a Digilent system board and conveys I/O signals between six screw terminals and a 6-pin header connection. Two of the terminals can be used to provide power from an outside source, and the other four can be used for data signals. The CON1 can be easily attached to a Digilent system board using a Digilent Modular Interface Board (MIB) and a six-pin cable. Signals from an outside device can be attached to the CON1 using the screw terminals Small size (1.10" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010092
    In stock: 5 
    Buy
    $15.91

  • Pmod CON3 - 4x servoanslutningar

      Pmod CON3 - 4x servoanslutningar
    The Digilent PmodCON3 Servo Connector Module Board (the CON3) makes it easy to drive up to four servo motors from any Digilent system board. The CON3 conveys signals between a 6-pin header and one of four servo-motor connectors. A terminal block and jumpers are provided so that an external motor power supply can be used. Screw terminal connector for R/C servo power supply Small size (.80" x 1.00") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010099
    In stock: 3 
    Buy
    $8.31

  • Pmod CON4 - 2x RCA-uttag

      Pmod CON4 - 2x RCA-uttag
    The Digilent PmodCON4 peripheral module connects a 6-pin header to two RCA audio jacks allowing you to connect to audio equipment. Flexible configuration of header pins and RCA jacks Small size (0.80" x 1.10") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010101
    In stock: 3 
    Buy
    $10.60

  • Pmod DA1 - AD7303BR 4x DA-omvandlare 8-bit

      Pmod DA1 - AD7303BR 4x DA-omvandlare 8-bit
    The Digilent PmodDA1 Digital To Analog Module Converter Board (the DA1) converts signals from digital to analog at up to one MSa per second. The DA1 uses a 6-pin header connector and at less than one square inch is small enough to be located where the signal is needed. The DA1 has four simultaneous D/A conversion channels, each with an 8-bit converter that can process a separate digital signal. It is possible to send a single signal, such as a reset signal, to all four channels simultaneously, but multiple unique signals cannot be sent simultaneously. Four D/A conversion channels Very low power consumption Small size (0.80" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010090
    In stock: 5 
    Buy
    $28.64

  • Pmod DA2 - DAC121S101 2x DA-omvandlare 12-bit

      Pmod DA2 - DAC121S101 2x DA-omvandlare 12-bit
    The Digilent Pmod DA2 Digital to Analog peripheral module converts signals from digital values to analog voltages on two channels simultaneously with 12-bit resolution. The Pmod DA2 uses a 6-pin header connector and at less then one square inch, is small enough to be located where the reconstructed signal is required. Two National Semiconductor DAC121S101, 12-bit D/A converters 6-pin header and 6-pin socket Two simultaneous D/A conversion channels Very low power consumption Small form factor (0.80" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010111
    In stock: 3 
    Buy
    $36.02

  • Pmod DA3 D/A converter

      Pmod DA3 D/A converter
    The Digilent PmodDA3 is a single, 16-bit, serial input, unbuffered voltage output digital-to-analog converter (DAC) that operates from a single 2.7V to 5.5V supply. The DAC output range extends from 0V to Vref and is guaranteed monotonic, providing ± 1 LSB INL accuracy at 16 bits without adjustment. Based on the Analog Devices AD5541A DAC Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41013695
    In stock: 5 
    Buy
    $63.73

  • Pmod DA4 - Eight 12-bit D/A outputs

      Pmod DA4 - Eight 12-bit D/A outputs
    Based on the Analog Devices AD5628 DAC Provides 8 channels of D/A conversion at 12 bits of resolution High-speed DSP compatible Low power consumption Small size (1.25" x 0.8") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41011330
    In stock: 11 
    Buy
    $51.69

  • Pmod DHB1 - Dubbel H-brygga

      Pmod DHB1 - Dubbel H-brygga
    The PmodDHB1 uses the Texas Instruments DRV8833 dual H-Bridge motor driver chip to drive two DC motors or one stepper motor. Two H-Bridge interfaces capable of 1.5A RMS (2A Peak) 2-channel quadrature encoder channels for Hall-effect sensors Motor voltage can be driven up to 11.8V, with a recommended 10.8V maximum Logic input voltage range of 2.5V to 5V Two JST 6-pin connectors for direct connection to Digilent motor-gearboxes Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41011610
    In stock: 5 
    Buy
    $33.61

  • Pmod DIN1 - 6x digitala ingångar

      Pmod DIN1 - 6x digitala ingångar
    The Digilent PmodDIN1 Digital Input Module Board (the DIN1) debounces digital input signals so they can be used directly by a Digilent system board. The DIN1 can receive signals from switches, sensor devices, or any other standard logic inputs. Four digital-input channels Input protection diodes Four debounce filters Small size (0.80" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010094
    In stock: 3 
    Buy
    $26.52

  • Pmod ENC - rotationsenkoder

      Pmod ENC - rotationsenkoder
    PMod ENC är en enkel rotationsenkoder med inbyggd tryckknapp. Modulen fungerar tillsammans med alla kort som har UEXT-anslutning.
    Part.no: 41009942
    In stock: 6 
    Buy
    $23.86

  • Pmod GYRO - L3G4200D gyroskop 3-axel

      Pmod GYRO - L3G4200D gyroskop 3-axel
    The PmodGYRO is a peripheral module featuring the STMicroelectronics® L3G4200D MEMS motion sensor. The L3G4200D provides a three-axis digital output gyroscope with built in temperature sensor. The PmodGYRO uses a standard 12-pin connection and communicates via SPI or I2C, defaulting to I2C communication. For information on connecting this product using TWI, Click here. This product is a type C device. Standard SPI and I2C interface 250/500/2000dps Selectable Resolutions Two customizable interrupt pins Power-down and Sleep Mode User configurable signal filtering Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010132
    In stock: 7 
    Buy
    $40.32

  • Pmod GYRO2 - ADXRS453 Accelerometer

      Pmod GYRO2 - ADXRS453 Accelerometer
    The PmodGYRO2 features the Analog Devices ADXRS453 High Performance, Digital Output Gyroscope that is ideal for systems in need of a gyroscope for high vibration environments. * Simple SPI interface * ±300°/sec angular rate sensing * Ultrahigh vibration rejection .01°/sec/g * Excellent 16°/hour null bias stability * Internal temperature compensation * Continuous self-test
    Part.no: 41011579
    In stock: 4 
    Buy
    $72.17

  • Pmod HB3 - H-brygga 2A

      Pmod HB3 - H-brygga 2A
    The Digilent PmodHB3 2A H-Bridge Module (the HB3) is an ideal solution for robotics and other applications where logic signals are used to drive small to medium-sized DC motors. The HB3 works with power supply voltages from 2.5V to 5V, but is normally operated at 3.3V as this is the supply voltage on most Digilent system boards. The HB3 is designed to work with either Digilent programmable logic system boards or embedded control system boards. Most Digilent system boards, such as the Nexys, Basys, or Cerebot, have 6-pin connectors that allow the HB3 to plug directly into the system board or to connect via a Digilent 6-pin cable. 2A H-bridge circuit for voltages up to 12V Two 2-pin screw terminal blocks for connection to motor Small size (0.8" x 1.20") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010095
    In stock: 1 
    Buy
    $21.22

  • Pmod HB5 - H-brygga 2A

      Pmod HB5 - H-brygga 2A
    The Digilent PmodHB5 2A H-bridge module is an ideal solution for robotics and other applications where logic signals are used to drive small to medium-sized DC motors such as the Digilent motor/gearbox. 2A H-bridge circuit capable of handling up to 12V Two feedback channels w/ Schmitt-trigger inputs Small size (0.8" X 1.3") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010110
    In stock: 2 
    Buy
    $33.61

  • Pmod I2S - 2x DA-omvandlare 24-bit

      Pmod I2S - 2x DA-omvandlare 24-bit
    The Digilent PmodI2S is a peripheral module that provides a D/A converter allowing for high quality stereo sound from a digital source. This module provides an easy interface for converting digital samples into an analog signal with a wide arrange of sample rates and a large dynamic range. Stereo D/A converter supports all major audio data interface formats Supports 16 to 24 bit audio at multiple sample rates, including 48, 96 and 192 Khz 3V-5V operating voltage Small size (.8" x 1.15") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010125
    In stock: 5 
    Buy
    $21.22

  • Pmod IOXP

      Pmod IOXP
    The PmodIOXP is an I/O expansion module powered by the Analog Devices ADP5589. It functions as an I/O port expander and keypad matrix decoder, and uses a standard 8-pin I2C connector allowing it to communicate with a system board via I2C. All communications with the device must specify a register address and a flag indicating whether the communication is a read or a write. This is followed by the actual data transfer. Device configuration is performed by writing to control registers within the device. Input and event data is accessed by reading certain device registers. A full list of registers and their functionality, as well as communication specifications, is found in the ADP5589 datasheet available on the Analog Devices website. I/O port expander that communicates with a host via an I2C interface 16-element FIFO for event recording 19 configurable I/Os Keypad decoding for matrices up to 11x8 PWM generator Open-drain interrupt output Dual Programmable logic blocks Debouncing on IOs Ships with a 10" 4-pin MTE cable
    Part.no: 41010134
    In stock: 4 
    Buy
    $31.83

  • Pmod JSTK

      Pmod JSTK
    The Digilent PmodJSTK joystick module is designed to be a versatile user interface that can be used in a wide variety of projects. The PmodJSTK has an Atmel ATtiny24 Microcontroller with 2K Flash, 128b EEProm, 128b of internal SRAM and a CTS252 Two Axis Resistive Joystick. The joystick also incorporates a center button. This center button, along with the two push buttons, are read by the microcontroller. Two Axis Resistive Joystick (CTS 252A103B60NB) Joystick also functions as a push button Two additional user buttons Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010113
    In stock: 6 
    Buy
    $45.66

  • Pmod KYPD

      Pmod KYPD
    The PmodKYPD is a peripheral module featuring a 16-button keypad. The keys are numbered in a hexadecimal fashion (0-9, A-F). It uses a standard 12-pin Pmod header that will indicate which row and which column has been pressed in the array of buttons. 16 clearly labeled buttons Pull-up resistors for each row Simple interface - each row & column given dedicated pins on the Pmod connector Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010127
    In stock: 5 
    Buy
    $26.52

  • Pmod LED

      Pmod LED
    The PmodLED has four high-bright LEDs that are driven by logic-level transistors so each LED can be illuminated with a logic high signal that provides less than 1mA of current. Four logic level inputs Four high bright red LEDs Small size (0.80" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010096
    In stock: 10 
    Buy
    $10.60

  • Pmod LS1

      Pmod LS1
    The PmodLS1 module is an interface module for connecting optical sensors to digital inputs on a Digilent system board. When used with reflective infrared light detector sensors (available from Digilent), the PmodLS1 is ideally suited for use in line-sensing robots. It is also well-suited for use as a general-purpose interface for either reflective or transmissive photo detectors. The module can be used with Digilent microcontroller boards or Digilent FPGA boards. The PmodLS1 is designed to be used with sensors containing an infrared LED and an infrared-sensitive photo-transistor. The module supports up to four sensors connected at the S1, S2, S3 and S4 headers Four 4-pin headers for interface with reflective or transmissive photo detectors On-board sensitivity adjustment Four on-board LEDs for monitoring input status Works with our IR Reflective Object Sensor Cable Assembly (IRROSC) Small size (0.80" x 1.0") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010102
    In stock: 2 
    Buy
    $15.91

  • Pmod LVLSHFT - Level shifter 8-ch 1.8 - 5.5V

      Pmod LVLSHFT - Level shifter 8-ch 1.8 - 5.5V
    The Digilent PmodLVLSHFT is a digital logic level shifter. This module is ideal for users who want to supply logic signals following a 3.3V CMOS standard but have an alternate logic level output that is used for other applications such as JTAG programming. The PmodLVLSHFT translates logic signals between two user supplied voltage levels. Users can use a small object such as a pen or a screwdriver to adjust the switches for the direction of the voltage translation. Translates logic signals between two user-supplied voltage levels 8 miniature switches to dictate logic level Voltage range between 1.8V and 5.5V 2×7 JTAG header
    Part.no: 41014115
    In stock: 9 
    Buy
    $30.00

  • Pmod MAX11311

      Pmod MAX11311
    The MAX11311PMB# peripheral module (Pmod) provides the necessary hardware to interface the MAX11311 12-channel programmable mixed-signal I/O device to any system that utilizes Pmod-compatible expansion ports configurable for SPI communication. The device is a 12-bit multichannel analog-to-digital converter (ADC) and a 12-bit buffered DAC output in a single IC. This device also includes software-configurable general-purpose I/O ports. A local and two remote temperature sensors keep track of junction and environmental temperatures. Adjacent pairs of ports can also be used as logic translator or analog switch. Each pin can also be used as a positive input of a comparator with programmable threshold.
    Part.no: 41015322
    In stock: 1 
    Buy
    $60.12

  • Pmod MIC

      Pmod MIC
    The PmodMIC is ideal for providing audio input for use with Digilent system boards. It has a microphone preamp with a dynamic range compressor and 12bit A/D converter. The PmodMIC is ideal for use with a Digilent system board and the PmodAMP1 to create a complete audio prototyping environment. OnSemi SA575 Low Voltage Compandor National Semiconductor ADCS7476AIM 12 bit A/D converter 3V-5V operating voltage Small size (0.80" x 1.1") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010114
    In stock: 6 
    Buy
    $17.95

  • Pmod NIC 100 (NEW)

      Pmod NIC 100 (NEW)
    The PmodNIC100 is a peripheral module designed to provide a complete Ethernet interface. It features the Microchip® ENC424J600 Stand-Alone Ethernet Controller. The ENC424J600 provides integrated MAC and PHY support, so the PmodNIC100 can add Ethernet functionality to any Digilent system board. Standard SPI interface IEEE 802.3 compatible Ethernet controller 10/100 Mb/s data rates MAC support 10BASE-T support 100BASE-TX support
    Part.no: 41010129
    In stock: 2 
    Buy
    $37.13

  • Pmod OC1

      Pmod OC1
    The Digilent PmodOC1 Open Collector Output Module Board can drive high current devices using MMBT3904 output transistors. The transistors are driven by logic signals from a Digilent system board. The transistors function as switches and can drive relays and turn on LEDs, motors, and other outside devices. Four output clamp diodes 40V maximum voltage Small size (0.75" x 0.80") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010089
    In stock: 3 
    Buy
    $23.34

  • Pmod OD1

      Pmod OD1
    The Digilent PmodOD1 Open Drain Output Module Board can drive high current devices using On-Semiconductor NTHD4508NT power FET output transistors. The output transistors are driven by logic signals from a Digilent system board. 4.1A peak output current (t 3.0A continuous current (at 25°C), 2.2A continuous current (at 85°C) One 6-pin header for input Two screw terminal blocks for outputs 20V max. output voltage Small size (0.80" x 1.15") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010116
    In stock: 3 
    Buy
    $22.28

  • Pmod OLED

      Pmod OLED
    The PmodOLED features an SPI-controlled monochrome OLED display, perfect for embedded applications requiring small, complex visual output. The PmodOLED uses a standard 12-pin connector to display output on a 128x32 pixel organic LED (OLED) panel. The graphic display panel uses the Solomon Systech SSD1306 display controller. An SPI interface is used to configure the display, as well as to send the bitmap data to the device. The PmodOLED displays the last image drawn on the screen until it is powered down or a new image is drawn to the display. Refreshing and updating is handled internally. 128 by 32 pixel 0.9 OLED display Standard SPI interface Clock speeds of up to 10MHz Internal display buffer Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010136
    Currently not in stock
    Buy
    $27.58

  • Pmod PS2

      Pmod PS2
    The Digilent PmodPS/2 module board allows a Digilent system board to send and receive signals from a PS/2-style keyboard or mouse. The PS/2 is designed for use with either a Digilent programmable logic system board or a Digilent embedded control system board. Power routing jumpers Small size (0.80" x 1.00") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010104
    In stock: 1 
    Buy
    $10.60

  • Pmod R2R

      Pmod R2R
    The PmodR2R board provides digital-to-analog conversion using a circuit that has been a staple in engineering design for decades. The board provides an easy way to gain insight and experience with R2R circuits. 8-bit digital to analog conversion at up to 25MHz Easy attachment of oscilloscopes to illustrate the data conversion process Small size (1.0" x 0.75") Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010123
    In stock: 2 
    Buy
    $15.91

  • Pmod REG1

      Pmod REG1
    The Digilent PmodREG1 is a small form factor voltage regulator able to provide up to 250ma of current at 3.3V. It is specifically designed to work with the Digilent PMOD modules and small embedded control boards, such as the NanoCon, ServoMini, or PmodSF, but is also useable as a general purpose voltage power supply module. 250mA, low dropout linear regulator Fixed 3.3V output voltage Input voltage range of 3.8V-16V Small form factor (0.80" x 1.20") Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010105
    In stock: 2 
    Buy
    $15.91

  • Pmod RF1

      Pmod RF1
    The PmodRF1 is a radio transceiver that can be selectively configured to operate in the open 902MHz to 928MHz ISM band for use in North America, the European SRD Band of 863MHz to 870MHz, or the Chinese WPAN band of 779MHz to 787MHz. This flexibility ensures that users from many parts of the world can safely use this one product in applications requiring wireless communication. The PmodRF1 features the Atmel AT86RF212, a low-power, long-range radio transceiver. Atmel's partner, Meshnetics, independently verified that the transceiver is capable of communicating at a range of 6km, but the effective range will depend on a variety of factors, such as antenna selection, line-of-sight, and other environmental obstructions. The board also features an SMA connector, which allows users to select the antenna that best suits their application. Operates in selected frequency ranges within the North American ISM band, the European SRD band, and the Chinese WPAN band Features a standard SMA connector for use with a wide range of antennas (2" antenna included) Small size (1.5" x 0.75") Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010121
    In stock: 2 
    Buy
    $42.44

  • Pmod RF2

      Pmod RF2
    The PmodRF2 is an interface board for the Microchip® MRF24J40 IEEE 802.15.4 2.4GHz RF transceiver module. The PmodRF2 can add RF communication to any Digilent system board. The PmodRF2 provides RF support for applications at data rates of 250kbps (IEEE 802.15) or 625kbps (Turbo mode). It is designed for use with the Microchip microcontroller families (PIC18, PIC24, dsPIC33, and PIC32) and the ZigBee ®, MiWi, and MiWi P2P software stacks all available for download at the Microchip website: www.microchip.com/wireless. IEEE 802.15-compliant RF transceiver Supports ZigBee ®, MiWi, MiWi P2P and proprietary wireless networking protocols ISM band 2.405-2.48GHz operation Simple SPI communication interface Integrated 20MHz and 32.768 oscillator circuitry Ships with a 6" 12-pin cable, a 6" 2x6-pin to dual 6-pin cable, one 12-pin header, and two 6-pin headers
    Part.no: 41010128
    In stock: 3 
    Buy
    $21.22

  • Pmod RJ45 (M,F)

      Pmod RJ45 (M,F)
    The PmodRJ45 Connector Modules can link any Digilent Peripheral Module (Pmod) to any AVR-based or FPGA-based Digilent board via a standard RJ-45 cable. The RJ45 modules ship as a pair of male and female boards Extends the 6-pin connection used by Pmods over greater distances via RJ-45 cable Ships with a 6" 6-pin cable and a 6-pin header
    Part.no: 41010112
    In stock: 4 
    Buy
    $21.45

Pages: 1 2