PIC

Nabduino PIC18F67J60 embedded webserver

Part.no: 41011343
This product is discontinued

Description

Nabduiono - PIC18 + etheret med Arduino footprint.

The Nabduino board is an open source peer-to-peer board with a webserver developed by Nabto. Nabto is a remote access web-browser framework for small-embedded devices.

The Nabduino board is designed to be hardware compatible with the Arduino form factor. This means that Arduino shields can be used to interface other systems. To be more specific the board is NOT software compatible.

The tools to be used with the Nabduino board is:

· MPLAB.X

· Ethernet flash tool

· Nabto browser plugins

· ICD3 or PICKIT debugger (only optional, firmware can be flashed via the ethernet port from a PC)

The hardware platform is open source, which means the source code and firmware is open and can be downloaded and adjusted, but require a license, which is shipped with the boards.

Customers Who Bought This Item Also BoughtCustomers Also Bought

  • DUINOMITE-eMEGA

      DUINOMITE-eMEGA
    DuinoMite is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features and Arduino like layout. DuinoMite allow you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without the need of any computer. You can store your code on the SD-CARD and to execute it on power up through autoexec.bas main code. Note: The BASIC language support for this board is limited. We recommend that you use C to be able to explore all of the features of the board. PIC32MX795L microcontroller 100 Mbit Ethernet PMP fast GPIO up to 80Mhz input/output 2MB on board FLASH DRIVE 64KB EEPROM memory Micro SD card USB OTG which allow it to act both as Host and Device, so it can accept Android ADK, Printers, Cameras, Keyboards, Mouses, etc USB devices. VGA connector Composite Video connector CAN driver and connector - note: CAN driver works on 5V and will not working when board is powered by Li-ion battery RS232 driver and connector Two UEXT connectors allowing Olimex modules to be connected one inside the box, and one outside the box PS-2 keyboard connector Audio output connector Arduino like format, i.e. can work with Arduino shields
    Part.no: 41011373
    In stock: 1 
    Buy
    439.00

  • Testsladdar med krokodil 30mm/50cm 10-pack HQ

      Testsladdar med krokodil 30mm/50cm 10-pack HQ
    Paket med 10st testsladdar i olika färger. Sladdarna har en isolerad krokodilklämma i båda ändarna. Mycket mjuk och följsam ledning. Kabeln är lödd i krokodilklämman. * Kabellängd: 480mm * Krokodilklämmor: 30mm
    Part.no: 41011551
    In stock: 168 
    Buy
    39.00

  • PIC-MAXI-WEB utvecklingskort

      PIC-MAXI-WEB utvecklingskort
    This board allows you to develop easily an application with Ethernet connectivity. It has everything you would normally need for such a purpose: power relays which you can command through web interface. LCD display which will display messages you fill in web forms, analogue inputs for connection to sensors, digital optoisolated inputs, trimmer potentiometer, temperature sensor, Ethernet connector. With this board you can easily automate your home and then control and monitor it from any point in the world via Internet. The extension connector is available so you can connect your cusom made hardware hassle free. The PIC18F97J60 has 128KB Flash programming memory and there is also an external 1Mbit (128KB) flash memory for data storage. The on-board DC/DC converter makes this board very tolerant to the external power supply which could be in 9-25V DC or 7-18V AC range, the bridge rectifier on the input allows both AC and DC adapters usage and makes power supply polarity problems go away. FEATURES PIC18F97J60 microcontroller with embedded Ethernet MAC and PHY and 128KB Flash programming space 1Mbit on board serial flash for web pages storage ICSP/ICD connector for programming and debugging with PIC-ICD2 and PIC-ICD2-POCKET. Temperature sensor Trimmer potentiometer connected to analogue input Two relays 10A/250VAC Four optoisolated digital inputs Twelve analogue inputs on terminal block Two buttons LCD16x2 with backlight RS232 interface Ethernet interface Complete web server and TCP-IP stack support as per Microchip's open source TCP-IP stack Terminal block for power supply works with 9-25 VDC power supply Extension header to connect to other boards Dimensions 120x108 mm (4.72x4.25")
    Part.no: 41011187
    Currently not in stock
    Buy
    499.00

  • Reläkort x2 5V

      Reläkort x2 5V
    This is a 5V 2-Channel Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430. 1. Each 5V Relay need 20mA driving current 2. 5V TTL control input which can be directly controlled by Arduino, AVR, PIC, ARM and others. 3. Indication LED for each Relay's Status
    Part.no: 41010282
    In stock: 4 
    Buy
    99.00

  • DUINOMITE-MEGA

      DUINOMITE-MEGA
    INTRODUCTION: DuinoMite is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features and Arduino like layout. DuinoMite allow you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without need of any computer. You can store your code on the SD-CARD and to execute it on power up thorugh autoexec.bas main code. FEATURES: PIC32MX795 microcontroller micro SD card USB OTG which allow it to act both as Host and Device, so it can accept Android ADK, Printers, Cameras, Keyboards, Mouses, etc USB devices. VGA connector Composite Video connector CAN driver and connector - note: CAN driver works on 5V and will not working when board is powered by Li-ion battery RS232 driver and connector two UEXT connectors allowing Olimex modules to be connected one inside the box one outside the box PS-2 keyboard Audio output connector Arduino like format i.e. can work with Arduino shields
    Part.no: 41010226
    In stock: 4 
    Buy
    349.00

  • Test leads 100mm f/f set of 50pcs

      Test leads 100mm f/f set of 50pcs
    Set of 50 jumper cables for 0.64mm headers. Length: 100mm. Assorted colors.
    Part.no: 41004222
    In stock: 6 
    Buy
    1 - 89.00
    10 - 80.10
    25 - 66.75