Measuring Instruments

Choose Subcategory

Generators (‏3)
Multimeters (‏7)
Oscilloscopes (‏16)
Cable testers (‏1)
Mikroskop (‏2)
Temperature (‏1)

Featured products

  PANEL METER   100µA   70x60
Vridspoleinstrument med nolljusteringsskruv. Klass 2.5 (max felvisning 2.5% av fullt skalutslag)
1 - $11.93
5 - $10.73
Buy
  PANEL METER   50Vdc 70x60mm
Vridspoleinstrument med nolljusteringsskruv. Klass 2.5 (max felvisning 2.5% av fullt skalutslag)
1 - $11.93
5 - $10.73
Buy
  Oscilloscop prob 100 MHz
Mätprob för oscilloskop med BNC-anslutning. Omkopplingsbar mellan 1x och 10x. Avtagbar testklämma. * Mätområde: DC - 100MHz, * Impedans: 1Mohm / 20pF
$36.02
Buy
  Oscilloscope Siglent 200MHz 4-ch SDS1204CFL
Bandwidth 200MHz Channel 4 channels+1 ext trig Real Time Sampling Half Channel:2GSa/s;Each Channel:1GSa/s Equivalent Sampling Rate 50GSa/s Memory Depth Single Channel:24K Rise time Input Impedance 1MO||13pF,50O Sec/div Range 2.5ns/div-50s/div Vertical Sensitivity 2mv-5v/div(1-2-5 sequence) Vertical Resolution 8bit Display Color TFT(480*234) 7" LCD CHARACTERISTIC: ? Memory depth of SDS1000CFL is 24Kpts ? Use Colored TFT LCD, the waveform display is clearer and stable. ? Screen saver function:1 minute to 5 hours ? Dual channel-channel bandwidth: 60MHZ-300MHZ. ? The real time sampling rate is 2GSa/s. ? Trigger Modes: Edge, Pulse, Video, Slope and Alternative trigger modes. ? Unique Digital Filter function and Waveform recorder function ? Pass/Fail function ?Thirty two parameters Auto measure function. ? Cursor measure covers Manual mode, Track mode and Auto mode. ? Channel waveform and its FFT waveform display on split screen. ? Pop-up Menu display pattern is more convenient for users using it. ? Multiple Language User Interface. ? Support Multilingual online help system. Model/Index The Common Specifications Of All SDS1000D Series Products Display 8X18 divides Waveform Capture Rate The highest capture rate exceed 1500 times/sec Input coupling DC, AC, GND Input Max voltage 400V(Vpp) Trigger Types Edge, Pulse, Video, Slope, Alternative Trigger Modes Auto, Normal, Single Trigger Source CH1?CH2?CH3?CH4?Ext?Ext/5?AC Line Save/Recall Provide four groups reference waveforms, twenty groups capture waveforms and twenty groups setups internal save/recall function and USB flash drive Save/Recall function Auto Measure Types Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Cmean, Mean, Vrms, Crms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Freq, Period, Rise time, Fall Time, +Width, -Width, +Duty, - Duty, BWid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF Cousor measure Manual, Track, Auto Sample Types Real Time, Equivalent Time Averages 4?16?32?64?128?256 Math +?-?*?\?Invert FFT Window: Hanning?Hanmming?Blackman?Rectangular Sampling Points: 1024 points XY Mode Phase Error: ±3 degrees Support the sampling rate : 10KSa/s~1GSa/s (in a 1-2-5 sequence) Display Model Main, Window, Window Zoom, Roll, X-Y Menu Display 2Sec, 5Sec, 10Sec, 20Sec, Infinite Display Language Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Spanish, Portuguese, Japanese, Korean, Italiana Power Source Voltage 100-240VAC?45HZ-440HZ?50VA Max Size and Weight 358mm x 156mm x118mm, about 4.5kg Connection USB Host: Support USB flash drive storage USB Device: Support PictBridge compatible printers and PC Remote control RJ-45(LAN): Support computer connecting Pass/Fail Interface Module Included accesories: 4x 1:1/10:1Proble, EasyScope3.0 Computer Software System, Power Cord, USB cable,User Manual, EasyDsoLib software package
$1 204.22
Buy
  Electronics Explorer Board
The Digilent Electronics Explorer board (EE board) includes all of the test and measurement equipment needed to design and test analog and digital circuits of all types. Built around a large solderless breadboard, the EE board includes oscilloscopes, waveform generators, power supplies, voltmeters, reference voltage generators, and thirty-two digital signals that can be configured as a logic analyzer, pattern generator, or any one of several static digital I/O devices. All of these instruments can be connected to circuits built on the solderless breadboards using simple jumper wires. Designed for daily use and intended for every student to own, the EE board combines everything needed to design and test circuits in a single "all in one" device. Even in introductory classes, students can complete, test, and analyze real circuit designs as a part of every homework assignment. No more once a week labs; now every student can complete designs in virtually any setting - any residence can be a complete, 24-hour design studio! The EE board is powered by the free, PC-based WaveForms software that makes it easy to acquire, store, analyze, produce and reuse analog and digital signals. WaveForms runs well on virtually any notebook PC, including low-cost Netbooks. A high-speed USB2 connection ensures all EE board instruments respond in near real-time. WaveForms data files are stored using standard formats, making it easy to share data between instruments, and to export data to word processors or graphics editors. This means well documented student lab/project reports can be completed using standard office tools, and submitted electronically. The EE board ships a power supply, a USB cable, and the "Starter Analog Parts Kit". This kit contains an assortment of analog parts so you can start building and testing circuits right out of the box. The kit includes: 1 Resistor 10O 1/4W 1 Resistor 50O 1W 2 Resistor 100O 1/4W 2 Resistor 1K 1/4W 1 Resistor 1.5K 1/4W 2 Resistor 2K 1/4W 2 Resistor 5.1K 1/4W 2 Resistor 6.8K 1/4W 10 Resistor 10K 1/4W 10 Resistor 20K 1/4W 2 Capacitor 100pF 2 Capacitor 0.01µF 2 Capacitor 0.1µF 2 Capacitor 1µF 1 Capacitor 4.7nF 1 Capacitor 22µF 1 Inductor 1mH 1 Diode IN4001 1 LED Red T1-¾ 1 Transistor NPN 40V 200mA 1 Transistor PNP 40V 200mA 1 MOSFET N-CH 60V 200mA 1 IC-7seg drv CD4511 1 IC-OpAmp TCA0372 1 IC-Inverter 74HC14 1 IC-NAND 74HC00 1 IC-OpAmp RC4558 1 Speaker 8140 Pre-trimmed jumper wires Note: Some of these parts may occasionally be substituted for equivalents, due to changing availability.
$873.49
Buy
  Oscilloscope probe 250MHz
Features complete probe set, for measurements up to 250MHz attenuation: 1:1 or 1:10 safety: conform to IEC-1010 cat II Specifications position x1: attenuation: 1:1 bandwidth: DC to 10MHz rise time: 35ns input resistance: 1Mohm (input resistance scope) input capacitance: cap. scope 46pF working voltage: 600Vdc incl. peak AC derating with frequency position REF: tip disconnected, scope input at ground position x10: attenuation: 1:10 bandwidth: DC to 250MHz rise time: 1.4ns input resistance: 10Mohm (if scope input = 1Mohm) input capacitance: ± 11pF working voltage: 600Vdc incl. peak AC derating with frequency compensation range: 10 to 35pF cable length: 1.2m
$60.12
Buy