Measuring Instruments

Choose Subcategory

Generators (‏4)
Multimeters (‏8)
Oscilloscopes (‏15)
Cable testers (‏1)
Microscopes (‏2)
Temperature (‏1)

Featured products

  Panel Meter 3A 60x47mm
Vridspoleinstrument med nolljusteringsskruv. Klass 2.5 (max felvisning 2.5% av fullt skalutslag)
1 - 89.00
5 - 80.10
Buy
  Panel Meter 50mA 70x60mm
Vridspoleinstrument med nolljusteringsskruv. Klass 2.5 (max felvisning 2.5% av fullt skalutslag)
1 - 99.00
5 - 89.10
Buy
  Panel Meter 15VDC 60x47mm
Vridspoleinstrument med nolljusteringsskruv. Klass 2.5 (max felvisning 2.5% av fullt skalutslag)
1 - 89.00
5 - 80.10
Buy
  Panel Meter 15VDC 70x60mm
Vridspoleinstrument med nolljusteringsskruv. Klass 2.5 (max felvisning 2.5% av fullt skalutslag)
1 - 99.00
5 - 89.10
Buy
  DSO Nano - extra probe
Extra measuring probe for DSO Nano. 3.5mm tele plug / black and white IC test clips. Approx. 50cm cable length.
49.00
Buy
  Adapter BNC female 3.5mm mono male
Adapter for the DSO Nano, from 3.5mm to BNC, which allows the use of regular oscilloscope probes with the DSO Nano.
39.00
Buy
  LCR40 testare för passiva komponeter RLC
The Atlas LCR is an advanced instrument that greatly simplifies the testing of passive components. Traditional LCR bridges are inherently complex and very time consuming to use. The Atlas LCR does everything automatically, it tells you the component type in addition to component value data. What's more, the Atlas LCR automatically selects the best signal level and frequency for the particular component under test. The software is smart; all internal calculations are performed with floating point maths. This means that precision isn't lost in the complex internal calculations and all results are displayed in properly formatted and easy#to# read engineering units, eg. 23.6pF. Summary Features: -Automatic component identification. -Automatic test frequency selection (DC, 1kHz, 15kHz and 200kHz). -Delayed or instant analysis (for hands free operation). -Auto power#off. -Probe and test lead compensation. -Interchangeable probe sets. -Automatic ranging and scaling. -1% basic accuracy for resistors. -1.5% basic accuracy for inductors and capacitors Ranges Resistance range 1ohm -- 2Mohm resolution 0.3/0.6ohm accuracy typ ±1.0% ±1.2ohm Capacitance range 0.5pF -- 10000uF resolution: 0.2/0.5pF accuracy: typ ±1.5% ±1.0pF Inductance range 1uH -- 10H resolution 0.4/0.8uH accuracy typ ±1.5% ±1.6uH
1 595.00
Buy
  Oscilloscope probe 250MHz
Features complete probe set, for measurements up to 250MHz attenuation: 1:1 or 1:10 safety: conform to IEC-1010 cat II Specifications position x1: attenuation: 1:1 bandwidth: DC to 10MHz rise time: 35ns input resistance: 1Mohm (input resistance scope) input capacitance: cap. scope 46pF working voltage: 600Vdc incl. peak AC derating with frequency position REF: tip disconnected, scope input at ground position x10: attenuation: 1:10 bandwidth: DC to 250MHz rise time: 1.4ns input resistance: 10Mohm (if scope input = 1Mohm) input capacitance: ± 11pF working voltage: 600Vdc incl. peak AC derating with frequency compensation range: 10 to 35pF cable length: 1.2m
499.00
Buy
  Oscilloskop MSO 100MHz 2-kan Siglent SDS2102X
Siglents nya SDS2000X-serie, toppmodernt oscilloskop med professionella prestanda. - 2 kanaler - 100MHz - Super Phosfor Display - 2Gsa/s - 140Mpts memory depth (single channel) - 140.000 waveforms/s (nomal mode) - 500.000 waveforms/s (sequence mode) - Trigger; edge, slope, pulse width, window, runt, interval, dropout, pattern, video - Serial decode and trigger (IIC, SPI, UART/RS232, CAN, LIN) (option) - 16 kanaler logikanalysator (option) - Waveform generator 25MHz (option)
8 999.00
Buy