LPC2106BBD48 LQFP40 Microcontroller ARM-core, 64kB RAM, 128k 40362106
In stock: 14


Single chip microprocessor based on ARM7 core.

Key features

16/32 bit ARM7TDMI-S processor.

64 kB on-chip Static RAM.

128 kB on-chip Flash Program Memory. 128 bit wide interface/accelerator enables high speed 60 MHz operation.

In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software. Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400 ms.

Vectored Interrupt Controller with configurable priorities and vector addresses.

EmbeddedICE-RT interface enables breakpoints and watch points. Interrupt service routines can continue to execute whilst the foreground task is debugged with the on-chip RealMonitor software.

Embedded Trace Macrocell enables non-intrusive high speed real-time tracing of instruction execution.

Multiple serial interfaces including two UARTs (16C550), Fast I²C (400 kbits/s) and SPI.

Two 32-bit timers (7 capture/compare channels), PWM unit (6 outputs), Real Time Clock and Watchdog.

Up to thirty-two 5 V tolerant general purpose I/O pins in a tiny LQFP48 (7 x 7 mm2) package.

60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop with settling time of 100 us.

On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.

Two low power modes, Idle and Power-down.

Processor wake-up from Power-down mode via external interrupt.

Individual enable/disable of peripheral functions for power optimization.

Dual power supply:

CPU operating voltage range of 1.65 V to 1.95 V (1.8 V +- 8.3 pct.).

I/O power supply range of 3.0 V to 3.6 V (3.3 V +- 10 pct.) with 5 V tolerant I/O pads.

Mfg: Philips

Preview FilesFiles

Product SpecificationSpecification

Family ARM
Architecture 32
Case LQFP-40
RAM 64kB
Clock 60MHz
Matningsspänning (min) 3V
Matningsspänning (max) 3.6V
GPIO 32x
PWM 6x
SPI 1x
I2C 1x
Timers 2x

Customers Who Bought This Item Also BoughtCustomers Also Bought

  • 2N3904 TO-92 NPN 50V 100mA

      2N3904 TO-92 NPN 50V 100mA
    NPN-transistor in TO-92-package. Used for signal amplification and switching. 40320004
    In stock: 10 
    1 - $0.36
    10 - $0.33
    25 - $0.27
    100 - $0.22

  • PCB w. photo resist fibreglass 100x160mm 1.0mm 35u double

      PCB w. photo resist fibreglass 100x160mm 1.0mm 35u double
    Double sided Coated with photoresist and blue protective film Thickness 1mm Copper thickness 35u 41004125
    In stock: 7 
    1 - $5.72
    10 - $5.15

  • MKE04Z8VTG4 TSSOP-16 ARM Cortex-M0+ 48MHz

      MKE04Z8VTG4 TSSOP-16 ARM Cortex-M0+ 48MHz
    The Kinetis KE04 ARM Cortex-M0 32 bit microcontroller, from NXP. Allows clock speeds up to 48MHz and has all the usual peripheral options from ARM, such as 12-bit ADC, I2C, SPI and UART. Runs on 2.7V-5.5V. 41015646
    Currently not in stock

  • TLC7524CN DIP-16 1ch 8-bit DAC parallell

      TLC7524CN DIP-16 1ch 8-bit DAC parallell
    8-bit D/A converter in DIP-package with parallel interface, TLC7524 contains a single converter and has one latching input per bit, an R2R ladder and input for external voltage reference. * Supply voltage: 5 - 15V * Settling time: 100ns * Resolution: 8 bits * Linearity: 0.5 LSB 41013895
    In stock: 1 

  • L7812ACV TO-220 Voltage regulator 12V 1.5A

      L7812ACV TO-220 Voltage regulator 12V 1.5A
    Voltage regulator in TO-220-package. Short circuit and thermal overload protected. Heatsink is recommended if used for heavy loads! Output voltage: +12V Max. output current: 1500mA 41009663
    In stock: 95 
    1 - $0.75
    10 - $0.67
    25 - $0.56
    100 - $0.45

  • PCB drill bit ø2.0mm shank ø3.175mm

      PCB drill bit ø2.0mm shank ø3.175mm
    Carbide drill for circuit boards (fiberglass laminate). Drill sizes range from 0.5 to 2.0mm. Very high precision and durability. Please observe that the drill is very sensitive to sideways forces and must be used with a drill press or other fixture! * Length: 38mm * Shank diameter: ø3.175mm (1/8") 41003978
    In stock: 3 
    1 - $4.22
    4 - $3.37