Cooling

Choose Subcategory

Accessories (‏22)
Fans (‏8)
Heat sinks (‏21)

Featured products

  Silicone bracket TO-3P/SOT-93
Isolerande, värmeledande, mellanlägg som kan användas istället för glimmerskiva och kiselfett för att överföra värmen från en halvledarkomponent till kylflänsen. Passar TO-3P / SOT-93 / TO-247 kapsel.
1 - $0.48
10 - $0.36
100 - $0.24
Buy
  Screw nylon MCS 3 x 10 mm
Nylon screw with M3 thread. * Dimensions: ø3 x 10mm
1 - $0.24
10 - $0.22
100 - $0.18
Buy
  Screw nylon MCS 4 x 12 mm
Nylon screw with M4 thread. * Dimensions: ø4 x 12mm
1 - $0.27
10 - $0.24
100 - $0.20
Buy
  Heatsink TO-220/TO3P 30x25x13mm w. pins
Heatsink for TO-220 or TO-3. Dimensions: 30 x 25 x 13mm Thermal resistance: 15.5°C/W
1 - $1.08
10 - $0.98
25 - $0.81
100 - $0.65
Buy
  Fan 92x92x25mm 12V 160mA 2400rpm
size (A x A x B): 92 x 92 x 25mm bearing: sleeve rated voltage: 12Vdc airflow: 74m³/hr current: 0.16A speed: 2400rpm noise (at 1m): 31.1dBA connection: leads weight: 73g material: plastic operating temperature: -20°C to +40°C
1 - $2.29
10 - $2.06
25 - $1.72
Buy
  Fan 80x80x25mm 12V 140mA 2600rpm
Specifications size (A x A x B): 80 x 80 x 25mm bearing: sleeve rated voltage: 12Vdc airflow: 56m³/hr current: 0.14A speed: 2600rpm noise (at 1m): 29.5dBA connection: leads weight: 63g material: plastic operating temperature: -20°C to +40°C
1 - $3.49
10 - $3.14
25 - $2.62
Buy
  Heatsink 1xTO-3 40x70x15mm
Heatsink for one TO-3. Dimensions: 40 x 70 x 15mm Thermal resistance: 9.5°C/W
1 - $4.67
10 - $4.21
25 - $3.51
100 - $2.80
Buy
  Heatsink DIL-6/8 8.5x6.3mm
Heatsink for DIL-6 and -8. Fits the voltage regulator on Raspberry Pi. Can be mounted easily with adhesive heat conducting foil (see related products). Dimensions (LxBxH): 8.5 x 6.3 x 4.8mm Fits: DIP-6 DIP-8
1 - $0.90
10 - $0.81
25 - $0.68
100 - $0.54
Buy
  Peltier TEC 30x30mm 5V 1.5A
Insulated heating / cooling element of peltier type. Just feed the element with 5VDC (up to 1.5A) and it will generate a temperature difference between the top and bottom side. Please note that the hot side will get hot, so a heatsink is usually required. The element can also be used in reverse. By exposing it to a temperature difference, a voltage is generated. * Max current: 1.5A @ 5V * Suggested Voltage range: 5V to 7V * Maximum temperature differential (Tmax @ Qc = 0): 65°C * DC Resistance: 2.5 ohms * Dimensions: 30mm / 1.18" x 30mm / 1.18" x 3.29mm / 0.12" * Wire Length: 289.56mm / 11.4" * Weight: 11.43g
$21.57
Buy
  Thermal tape self adhesive 3M 8810 80x80mm
Self-adhesive thermal tape from 3M. The tape is sold in sheets of 8 x 8cm and is 0.25mm thick (10mils). Extremely good adhesive and thermal transfer characteristics, but is electrically insulating.
$7.11
Buy
  Heatsink TO-220 19.5x13x13mm clamp
Small heatsink that can be either clamped or screwed to a TO-220-package. The pin on the back side can be used for soldering the heatsink to a circuit board.
1 - $0.96
10 - $0.87
100 - $0.58
Buy
  Heatsink 135x75x25mm (surplus)
Extruded aluminium heat sink for general purposes. * Width: 135mm * Length: 75mm * Height: 25mm * Thermal resistance: 1.5°C/W * Manufacturer: Fischer * Model: SK60-75
$8.31
Buy