Connectors

Choose Subcategory

Power supply (‏28)
IC sockets (‏40)
Battery (‏48)
IDC flat cable (‏50)
Special (‏41)
Splicing (‏11)
D-SUB (‏58)
Mate-N-Lok (‏21)
Terminals (‏22)
DC (‏25)
Modular (‏13)
Fastin-Faston (‏13)
USB (‏14)
Ferrules (‏7)

Featured products

  DIL-socket 16-pin
Standard 16-pin IC-socket (DIP-16). It's easier to lift a bad IC from a socket than to desolder it!
1 - $0.24
30 - $0.14
300 - $0.10
Buy
  N splice male-male
1 - $2.29
10 - $2.06
25 - $1.72
Buy
  Solder lug PCB 1.3mm 100pcs
Solder lugs for soldering into PCBs. Pin length: 7.1mm Max pin width: 1.4mm Lug length: 4mm Lug width: 3mm
1 - $3.49
10 - $3.14
Buy
  Battery holder 2xAA wire connector
Battery holder for 2 AA / LR6 batteries. With wires. The batteries are connected in series.
$0.96
Buy
  PL259 plug RG-58 crimp Amphenol
UHF PL-259 crimp-kontakt för RG-58
1 - $6.27
10 - $5.64
Buy
  2.5mm jack stereo kabel plast
2.5mm stereo (TRS) receptacle for cable mounting. Solder tabs and kink protection for cable. * Max. cable diameter: 4.2mm * Sleeve length: 37mm
1 - $0.60
10 - $0.48
25 - $0.40
100 - $0.24
Buy
  Enclosure D-SUB 37p plastic light grey
Gray plastic enclosure for 37-pole D-SUB connectors. The connector is attached to the cover with screws. Strain-relief for cable. Sold complete with screws. * Max cable diameter: 11.5mm
$2.65
Buy
  Banana plug 4mm blue
Blue 4mm banana plug. The lead is attached using a screw, it is also possible to solder it on.
1 - $0.96
10 - $0.87
25 - $0.72
Buy
  Crimp socket Micro-Fit AWG 20-24
Crimp sleeve for Molex Micro-Fit contact housings (female). For cable: AWG20-24
1 - $0.26
25 - $0.23
100 - $0.19
Buy
  3.5mm jack stereo chassie/PCB
3.5mm stereo jack. Knurled nut for chassis mounting. The solder tab contacts are all on the back side of the jack for circuit board mounting. * Mounting hole: ø6mm * Contacts: 1.8 x 0.25mm
1 - $1.81
10 - $1.63
25 - $1.36
100 - $1.08
Buy
  Mini XLR 3-p male chassis
Mini-xlr for chassis mounting. Three poles. Manufacturer: Rean Type: RT3MP
$4.34
Buy
  Battery Holder 2xAA with Cover and Switch - JST-XH Connector
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are about 150mm and are terminated with a JST-XH (2.50mm pitch) connector. Dimensions: 67.9 x 32.8 x 18.25mm
$1.81
Buy