Circuit board making

Choose Subcategory

Adapter cards (‏38)
Misc (‏10)
Film (‏2)

Featured products

  Test board for SD-MMC incl connector
This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown. This is the new Push-Push type socket. The board has 11 pins: COM : Common - Connects to the housing WP : Write Protect Detect Switch CD : Card Detect Switch P9 : Not used in SPI Mode (Pin 9 on SD Card) IRQ : Not used in SPI mode (Pin 8 on SD Card) DO : Serial Data Out GND : Ground - Connect this to COM to ground the housing CLK : Serial Clock VCC : 3.3V Power DI : Serial Data In CS : Chip Select It is recommended that you connect the COM pin to GND if you plan to use the CD or WP pins.
1 - $12.44
10 - $11.19
Buy
  Prototype board Kangaroo USB+PSU (SMD)
This is a project board specially designed to fit the Sparkfun Enclosures. The board provides the user with 3.3V and 5V regulated rails from a single Lithium Polymer battery. USB serial communication is also on-board with an FTDI FT232 USB chip, with selectable 3.3V or 5V logic. The LiPo cell plugs into the provided JST connector, and charging is available over USB (100mA) or external source (5V, 250mA). Finally, the board has a generous prototyping area for surface mount components (2.54mm x 1.27mm, 50mil x 100mil pads). Features: * 3.3V@100mA * 5V@265mA (DC-DC Step Up) * LiPo Battery Connection (3.8V nominal) * USB-Serial TTL connection * Proto Area for SMD * Fits SparkFun enclosure
1 - $25.18
10 - $22.66
Buy
  Adaper board Xbee
This is a simple breakout board for the popular XBee product from Maxstream. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board. This is the PCB only. Please order the accompanying 2mm sockets (you'll need 2!) and 0.1" headers.
1 - $3.69
10 - $3.32
100 - $2.77
Buy
  PCB FR4 1.6mm 35u 80x100 single
Single sided copper clad board. 1.6mm glass-reinforced epoxy laminate (FR4). 35µm copper thickness. Size: 80 x 100mm
1 - $2.26
10 - $2.03
25 - $1.69
Buy
  PCB FR4 1.6mm 35u 200x160 single
Single sided copper clad board. 1.6mm glass-reinforced epoxy laminate (FR4). 35µm copper thickness. Size: 200 x 160mm
1 - $7.23
10 - $6.51
25 - $5.42
Buy
  PCB w. photo resist fibreglass 100x160mm 1.5mm 70u single
Enkelsidigt Belagd med blå skyddsfilm Positiv fotoresist.
1 - $6.75
10 - $6.07
Buy
  PCB w. photo resist fibreglass 160x233mm 1.5mm 70u single
Enkelsidigt Belagd med blå skyddsfilm Positiv fotoresist.
1 - $14.46
10 - $13.01
Buy
  PCB w. photo resist fibreglass 200x300mm 1.5mm 35u double
Dubbelsidigt Belagd med blå skyddsfilm Positiv fotoresist.
1 - $21.69
10 - $19.52
Buy
  PCB w. photo resist fibreglass 160x233mm 1.5mm 105u double
Dubbelsidigt Belagd med blå skyddsfilm Positiv fotoresist.
1 - $23.80
10 - $21.42
Buy
  Experiment board 1 hole 20x80mm plated holes
Prototype board with 168 through-plated holes. The holes are not connected. Traces are made simply by forming the component legs or with solid-core wire. * Dimensions: 20 x 80mm * Mounting holes (c-c): 16 x 76mm (ø2.2mm) * Holes: 168x (6 x 28) / ø1mm * Pitch: 2.54mm (0.1")
1 - $0.96
10 - $0.48
Buy
  Protoboard for FB20
Protoboard made for enclosure FB20. The holes are not connected. Traces can be made using component legs or hook-up wire. * Dimensions: 71.5 x 46.5mm * Mounting holes (c-c): 56.5 x 41.5mm (ø2.54mm) * Component holes: ø1mm * Grid: 2.54mm (0.1")
$3.13
Buy