Arduino starter kit

Showing 1 to 10 of 10 matching products
Sort by
 
  • Arduino 101 - Starter Kit Basic

      Arduino 101 - Starter Kit Basic
    Starter kit for Arduino/Genuino 101, in collaboration with Malmö University. Contents: * 1x Arduino/Genuino 101 microcontroller * 1x USB cable A-male / B-male 1.8m * 1x 840-tie solderless breadboard * 65x Hook-up wires with pins (assorted lengths) * 10x LED 5mm red * 10x LED 5mm green * 5x LED RGB WS2812 * 1x FET transistor N-ch 60V 17A * 10x Resistor 1/4W 220 ohm * 10x Resistor 1/4W 1 kohm * 10x Resistor 1/4W 10 kohm * 10x Resistor 1/4W 1 Mohm * 2x Potentiometer 10 kohm * 5x Push button 12mm * 1x Piezo summer 12mm * 1x Copper tape 5mm x 15m * 1x Servo 120° * 1x Servo 360°
    Part.no: 41015411
    In stock: 2 
    Buy
    899.00

  • Component kit for Exploring Arduino

      Component kit for Exploring Arduino
    Component kit for the book Exploring Arduino. Includes all components required for the experiments in the book. Components for the optional experiments are not included but can be ordered separately. Component list: 1 Arduino UNO (MEGA328) rev 3 (art.nr: 12200029) 1 Trimmer 10k (art.nr: 33860103) 1 Battery connector 9V (art.nr: 40210001) 8 LED red (art.nr: 40300051) 5 LED yellow (art.nr: 40300053) 5 LED green (art.nr: 40300054) 5 LED blue (art.nr: 40300057) 1 1N4004 DO-41 400V 1A (art.nr: 40310004) 2 PN2222A TO-92 NPN 40V 800mA (art.nr: 40322222) 1 74HC14 DIP-14 Hex inverter (art.nr: 40370014) 1 74HC595 DIP-16 8-bit shift register (art.nr: 40370595) 1 El.lyt 0.1uF 50V 85C radial (art.nr: 40520001) 1 El.lyt 22uF 16V 85C radial (art.nr: 40520023) 4 Resistor 0.25W 100ohm (art.nr: 40810210) 10 Resistor 0.25W 150ohm (art.nr: 40810215) 10 Resistor 0.25W 220ohm (art.nr: 40810222) 10 Resistor 0.25W 1kohm (art.nr: 40810310) 2 Resistor 0.25W 4.7kohm (art.nr: 40810347) 10 Resistor 0.25W 10kohm (art.nr: 40810410) 1 Photo resistor CdS 18-50 kohm (art.nr: 40850005) 1 LCD 2x16 char yellow/green LED (art.nr: 41001407) 1 Battery 9V GP Ultra (art.nr: 41002336) 1 Sharp GP2D12 IR cable (art.nr: 41002492) 1 Hook-up wire for breadboard (art.nr: 41002700) 1 Servo small type HS-55 (art.nr: 41003477) 1 USB cable A male - B male 1.8m (art.nr: 41004197) 1 Distance sensor IR GP2Y0A21Yk (art.nr: 41004830) 1 Speaker 8ohm ø40mm 0.25W (art.nr: 41009728) 1 SN754410NE DIP-16 Motordrivare (art.nr: 41010085) 3 LED RGB common cathode (RCGB) (art.nr: 41010546) 1 L4940V5 Voltage regulator 5V (art.nr: 41010669) 5 Push button PCB 6x6x6mm black (art.nr: 41011617) 1 Motor 1.5-4.5V (art.nr: 41011871) 1 Breadboard 400 connections (art.nr: 41012199) 1 TMP36 TO-92 Temperature sensor (art.nr: 41012431) 1 Ceramic MLCC 1uF 50V (art.nr: 41012432) Components for the optional experiments (not included in this kit): 1 Arduino Ethernet Shield 1 ethernet cable 1 Triple-Axis Analog Accelerometer 1 Dual-Axis Analog Gyroscope 1 SparkFun USB XBee Explorer 1 TC74A0-5.0VAT I²C Temperature Sensor 1 MCP4231 Digital SPI Potentiometer 1 extra UNO eller Leonardo 1 extra USB-kabel 2 XBee Series 1 Radios 2 XBee Shields 1 Real-Time Clock Breakout 1 SD card Shield & SD Card
    Part.no: 41012434
    Currently not in stock
    Buy
    1 081.49

  • Digital Sandbox - Add-On

      Digital Sandbox - Add-On
    This is the Add-On kit for the Digital Sandbox (DS) learning platform. With this add-on you will be able to perform the final three circuit experiments found in the DS Guide book which include making an electric musical instrument, telling a motor to spin as fast as you want, and controlling a servo. This is the perfect kit if youve completed everything to do with the Digital Sandbox but are looking for more! Note: If you are looking for the first 13 experiments they can be found with the Digital Sandbox learning platform. Digital Sandbox Experiments: Circuit 14: Opto-Theremin Circuit 15: Serial Motoring Circuit 16: Servo Sweeper Includes: Servo Hobby Motor RedBot Buzzer Male Header
    Part.no: 41013020
    In stock: 1 
    Buy
    129.00

  • Inventor Electronic Kit

      Inventor Electronic Kit
    Makeblock Inventor Electronic kit är en moulär plattform för snabbt prototypbygg. Kitet innehåller 12 sensorer och motorer, alla med färgkodade kontakter för att göra kabeldragningen så enkel som det bara går. För mer kontroll utan kodning, använd Bluetooth-modulen (dual mode 2.0 och 4.0) och ladda ner Makeblocks app. Alla modulerna kommer med Arduino bibliotek för snabb programmering. Förutom Arduino programmering stöder detta kit även grafiska programmerings språk som MIT Scratch och Ardublock, dessa språk är perfekt för att lära barn att interagera mellan mjuk- och hårdvara. Innehåll: * 1x9g Micro Servo * 1xME Orion * 1xME Utraljuds sensor * 1xME light and Grayscale sensor * 1xME PIR sensor * 1xME Ljud sensor * 1xME Temperatur sensor * 1xME 7-segment display * 1xME Joystick * 1xME Potentiometer * 1xME RJ25 Adapter * 1xME Bluetooth modul * 1xME RGB LED * 1xME 130DC motor * 4x6P6C RJ25-kabel 0,2m * 2x6P6c RJ25-kabel 0,35m * 1x6P6C RJ25-kabel 0,5m * 1xUSB Typ A hane till micro-B kabel * 1xBatterihållare för 6xAA-batterier
    Part.no: 41014739
    In stock: 1 
    Buy
    1 590.00

  • MAH Starter-kit for Arduino rev 3

      MAH Starter-kit for Arduino rev 3
    Starterkit with contents to suite the Arduino courses at Malmo University Contents: 41014719 Arduino/Genuino UNO USB board rev 3 10160840 Bread-board 840 connection points 41000663 Piezo transducer 4.5 kHz 41001412 Push button PCB 0.8 mm svart 40910027 Pot 10 kohm lin PCB 40850001 Photo resistor CdS 2-5 kohm 41003291 USB-cable A-hane - B-hane 2m 41003181 Hook-up wires for bread-board, smooth ~60pcs 10 pcs resistors and LEDs
    Part.no: 41014742
    Currently not in stock
    Buy
    399.00

  • Makey Makey - Deluxe Kit

      Makey Makey - Deluxe Kit
    You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey MaKey. Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator clips. The MaKey MaKey is an invention kit that tricks your computer into thinking that almost anything is a keyboard. This allows you to hook up all kinds of fun things as an input. For example, play Mario with a Play-Doh keyboard, or piano with fruit! The MaKey MaKey uses high resistance switching to detect when you've made a connection even through materials that aren't very conductive (like leaves, pasta or people). This technique attracts noise on the input, so a moving window averager is used to lowpass the noise. The on-board ATMega32u4 communicates with your computer using the Human Interface Device (HID) protocol which means that it can act like a keyboard or mouse. There are six inputs on the front of the board, which can be attached to via alligator clipping, soldering to the pads, or any other method you can think of. There are another 12 inputs on the back, 6 for keyboard keys, and 6 for mouse motion, which you can access with jumpers via the female headers. If you wish to use a different set of keys, or otherwise change the behavior of your MaKey MaKey, you can simply reprogram it using the Arduino environment. Oh yeah, we didn't mention that the MaKey MaKey is an Arduino-compatible controller? That's right, it runs the Leonardo bootloader so reprogramming is fast and easy. The Deluxe Kit includes everything that the basic kit does plus another pack of alligator clips, a pack of jumper wires and a roll of copper tape so you can really go crazy! Includes: 1 x MaKey MaKey HID Board 2 x Alligator Clip Pack 1 x Jumper Wires Pack 1 x Mini-USB Cable 1 x Roll of Copper Tape
    Part.no: 41013181
    In stock: 3 
    Buy
    629.00

  • Makey Makey - Standard Kit

      Makey Makey - Standard Kit
    You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey MaKey. Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator clips. The MaKey MaKey is an invention kit that tricks your computer into thinking that almost anything is a keyboard. This allows you to hook up all kinds of fun things as an input. For example, play Mario with a Play-Doh keyboard, or piano with fruit! The MaKey MaKey uses high resistance switching to detect when you've made a connection even through materials that aren't very conductive (like leaves, pasta or people). This technique attracts noise on the input, so a moving window averager is used to lowpass the noise. The on-board ATMega32u4 communicates with your computer using the Human Interface Device (HID) protocol which means that it can act like a keyboard or mouse. There are six inputs on the front of the board, which can be attached to via alligator clipping, soldering to the pads, or any other method you can think of. There are another 12 inputs on the back, 6 for keyboard keys, and 6 for mouse motion, which you can access with jumpers via the female headers. If you wish to use a different set of keys, or otherwise change the behavior of your MaKey MaKey, you can simply reprogram it using the Arduino environment. Oh yeah, we didn't mention that the MaKey MaKey is an Arduino-compatible controller? That's right, it runs the Leonardo bootloader so reprogramming is fast and easy. Note: Now included with the MaKey MaKey is a USB cable, pack of jumper wires as well as a pack of alligator clips! Includes: 1 x MaKey MaKey HID Board 1 x Alligator Clip Pack 1 x Mini-USB Cable 1x Jumper Wire Pack
    Part.no: 41011031
    In stock: 5 
    Buy
    529.00

  • Sparkfun Inventor's Kit 3.3 - Arduino Uno

      Sparkfun Inventor's Kit 3.3 - Arduino Uno
    The SparkFun Inventors Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You dont need any previous programming or electronics experience to use this kit. The on-line SIK Digital Guide (in the Documents section below) contains step by step instructions of how to connect each circuit with the included parts. Full example code is provided and explained and even includes troubleshooting tips if something goes wrong. The kit does not require any soldering and is recommended for beginners ages 10 and up. This version of the SIK replaces the SparkFun RedBoard for the tried and true Arduino Uno and removes the SIK Guidebook and carrying case. With these parts being swapped and removed we were able to reduce the overall size and weight of the kit making shipping cheaper and easier for anyone ordering it internationally. Note: As stated above, this SIK does NOT include a carrying case.
    Part.no: 41013370
    Currently not in stock
    Buy
    1 - 1 159.00
    10 - 1 066.28
    20 - 1 008.33