Arduino LCD modules

Showing 1 to 16 of 16 matching products
Sort by
 
  • 2.4" TFT LCD Touch shield för Arduino

      2.4" TFT LCD Touch shield för Arduino
    The 2.4TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level. It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board. Please note that this shield isn't 100% compatible with Arduino UNO rev.3 as it touches the USB-port.
    Part.no: 41010284
    In stock: 8 
    Buy
    1 - 280.00
    10 - 224.00

  • 2.8" TFT LCD Touch shield för Arduino

      2.8" TFT LCD Touch shield för Arduino
    Arduino 2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ILI9325DS with 8bit data and 4bit control interface. The Arduino 2.8" TFT LCD Touch shield can work with both 3.3V and 5V, so it can dispaly on Chipkit UNO32 and Simplecortex as well. Arduino UNO Rev3 / Mega Shield compatible footprint Arduino library UTFT support TFTResolution : 240 x 320 pixels Size : 2.8" Colors : 262K Backlight : LED Driver IC: ILI9325DS Board Size 56mm x 54mm Operation Level Digital 3.3V Digital 5V Note: This shiled is 100% compatible with ITeaduino, Simplecortex. But not 100% compatible with Arduino UNO because of its big USB connecter socket.
    Part.no: 41010415
    In stock: 4 
    Buy
    1 - 329.00
    10 - 263.20

  • 4D Display adapter shield II

      4D Display adapter shield II
    The Arduino Display Adapter is a simple Arduino Shield designed to provide a convenient interface to attach 4D Systems display modules to the Arduino platform, without having to use jumper wires on the Arduino headers. Communication to the 4D Systems display modules is performed via the Arduino's serial port (RX and TX), and is provided to the user in a simple 5-pin interface, where a 5 way cable can be attached between the Shield and the display module. Power for the display is supplied from the Arduinos 5V bus. No external power is required for the Display Module as all power is supplied from the Arduino, via the display adapter. Features: Direct Shield connection to the Arduino Simple 5-pin serial interface for 4D System display modules Arduino supplied 5V power for display module 5 wire ribbon included
    Part.no: 41012187
    In stock: 2 
    Buy
    109.00

  • CleO35 RIO Adapter

      CleO35 RIO Adapter
    Adapter for mounting the regular Arduino UNO to CleO35.
    Part.no: 41015272
    In stock: 1 
    Buy
    153.00

  • CleO35A TFT display 3.5" för Arduino

      CleO35A TFT display 3.5" för Arduino
    CleO 3.5in Touchscreen LCD for Arduino The CleO graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 3.5in 320 x 480pixel TFT LCD panel with resistive touchscreen Landscape and portrait modes supported Anti-Aliased graphics throughout for much finer image quality Smooth animations at up to 60fps Direct file transfers between microSD/eFlash and Graphics subsystem without using Host processor resources FT810 Embedded Video Engine (EVE) graphic controller FT903 32-bit microcontroller MicroSD card socket 8MB eFlash memory USB DFU port for firmware updates Camera interface via 24-pin 0.5mm pitch FFC/FPC, bottom-contact connector Support for OmniVision OV2640 camera module or CleO-CAM1A camera PWM audio supported with speaker amplifier Ready to use in a panel mountable bezel Operating temperature range: -20 to +70°C
    Part.no: 41015235
    In stock: 2 
    Buy
    995.00

  • ITDB02 Adapter shield för Arduino

      ITDB02 Adapter shield för Arduino
    The ITDB02 LCD module is work in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino. Now user can directly plug the ITDB02 in the shield and stand on the Arduino board. ITDB02 Arduino shield support both 3.3V mainboard and 5V mainboard, so it not just can be used with Arduino but can with other Arduino compatible mainboards , like ChipKit UNO32. Dimension: 70mm x 56mm
    Part.no: 41011350
    In stock: 19 
    Buy
    69.00

  • ITDB02 Adapter shield för Arduino MEGA

      ITDB02 Adapter shield för Arduino MEGA
    The ITDB02 LCD module works in 3.3V voltage level and it's not compatible with Arduino MGEA pins , so we make a shield for Arduino MEGA. Now user can directly plug the ITDB02 in the shield and stand on the Arduino MEGA board. ITDB02 Arduino MEGA shield support both 3.3V mainboard and 5V mainboard, so it not just can be used with Arduino MEGA but can with other Arduino MEGA compatible mainboards , like ChipKit MAX32. Note: It does not support Iteaduino Mega. Dimension: 102mm x 58mm
    Part.no: 41015070
    In stock: 17 
    Buy
    99.00

  • LCD & button shield I2C/UART

      LCD & button shield I2C/UART
    Shield that provides an LCD-display with backlight and four push buttons for Arduino. Perfect for quickly creating a simple interface for any project! A PIC-processor on the shield controls the display and buttons and handles the I2C communication with the Arduino via I2C or UART. In addition to the display and buttons, the shield also has 10x GPIOs that are connected to the PIC-processor, also controllable via I2C or UART. See example code under the tab files!
    Part.no: 41012864
    In stock: 2 
    Buy
    159.00

  • LCD Key Shield

      LCD Key Shield
    Shield for UNO-compatible Arduino boards with a 16x2 characte LCD screen, a five-way miniature joystick and a rotatry encoder. The shield also breaks out all available GPIOs (D11-D13 & A1 - A5) to headers.
    Part.no: 41012444
    In stock: 14 
    Buy
    129.00

  • LCD Keypad shield 16x2

      LCD Keypad shield 16x2
    This is a very popular LCD Keypad shield for Arduino board. It can be directly plug onto the Arudino board, no soldering or fly-wiring needed. A 16x2 HD44780 compatible LCD, White character & Blue backlight. This Shield uses Arudino LCD4Bit library. Board Size 83mm x 57mm Operation Level Digital 3.3V Digital 5V
    Part.no: 41010285
    In stock: 16 
    Buy
    1 - 99.00
    10 - 89.10
    25 - 74.25

  • LCD Modul 2.8" TFT

      LCD Modul  2.8" TFT
    ITDB02 is a TFT LCD Screen Module Series, not just a LCD break but includes the Touch , SD card and Flash design. So its a powerful extension dispaly module for your project. ITDB02-2.8 module is a 65K color , 240*320 (resolution), 2.8 inch TFT LCD screen. The LCD has a wide viewing angle , the contrast is also very suitable. ITDB02-2.8 uses the ILI9325DS controller , it support 8bit data interface , and easy to be drived by many MCU like STM32 ,AVR and 8051. ITDB02-2.8 is designed with a touch controller in it . The touch IC is TSC2046, and touch interface is included in the 40 pins breakout. Another useful extension in the ITDB02 is the SD Card socket . It use the SPI mode to operate the SD card, the SPI interface include in the 40pins breakout. The IDTB02 layout a 40 pins interface for your project , the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus. The pins named with D_ is the touch bus , the pins named with SD_ is SD bus, the pins named with F_ is Flash bus. *ITDB02 module pins is work at 3.3v DC, if you need to connect the module with the 5v voltage I/O , you need to add the 30k and 20k resistors to reduce voltage. But for the Power supply, you should use the 5V for Vin pin. *ITDB02-2.8 just can used the 8bit mode. *ITDB02-2.8 is compatible with ITDB02_Graph Library
    Part.no: 41010665
    In stock: 19 
    Buy
    1 - 249.00
    10 - 224.10
    25 - 186.75

  • LCD Modul 2.4" TFT

      LCD Modul 2.4" TFT
    ITDB02 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So its a powerful extension module for your project. The LCD in the ITDB02 is 240374PQ . Its a 65K color , 320*240 (resolution),2.4 inch TFT LCD screen.The LCD has a wide viewing angle , the contrast is also very suitable. The Screen include a controller ILI9325, its a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. ITDB02 is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. We will offer two version of ITDB02 , one is with touch screen and touch controller , another is without the touch function , it will just use as a LCD screen for display- so it will be inexpensive than former. Another useful extension in the ITDB02 is the SD Card socket . It use the SPI mode to operate the SD card, the SPI interface include in the 40pins breakout. There is a reserve extension design in the ITDB02 , thats the external flash . Its leave the pad and the pins out for the SST25VF016B Flash. So when you need , you can easily add a external flash for your project . The IDTB02 layout a 40 pins interface for your project , the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus. The pins named with D_ is the touch bus , the pins named with SD_ is SD bus, the pins named with F_ is Flash bus. ITDB02 is work at 3.3v DC, if you need to connect the module with the 5v voltage I/O , you need to add the 30k and 20k resistors to reduce voltage. ITDB02 default use the 8bit mode , and if you need the 16 bit mode, you can tear the LCD screen down form the board , and move the R2 resistor to R1 to change the data mode. Its a hard job , and easy to destroy the screen, so if you need a 16bit mode , you had better tell us before shipping , we will set the data mode for you. When you use the 8bit mode , the DB8-DB15 is used ,please remember to pull the DB0-DB7 to GND.
    Part.no: 41010664
    In stock: 18 
    Buy
    1 - 219.00
    10 - 197.10
    25 - 164.25

  • RGB LCD shield 16x2 2-pin

      RGB LCD shield 16x2 2-pin
    Serial LCD module with RGB backlight. Mounted as a shield on Arduino. Uses just two pins for communicating via I2C with Arduino. The module also has five buttons that can be read from Arduino. The module can also be used with any microcontroller that supports I2C. Note that this product is a kit and requires some assembly!
    Part.no: 41011771
    In stock: 5 
    Buy
    1 - 279.00
    10 - 251.10
    25 - 209.25

  • RGB LCD Shield 16x2 2-pin - without LCD

      RGB LCD Shield 16x2 2-pin - without LCD
    LCD-module as a kit. Fits on Arduino boards as a shield. Uses just two pins on Arduino (pin 4 and 5 alt. 20 and 21) and communicates over I2C. On the board are also five tactile push buttons that can be read from Arduino. This kit is the same as 41011771, except without the actual LCD. Works with most 16x2 LCDs! This module can be used with any micro controller that supports I2C.
    Part.no: 41011926
    In stock: 2 
    Buy
    169.00

  • RGB LCD shield 16x2 2-pin inverterad

      RGB LCD shield 16x2 2-pin inverterad
    Serial LCD module with RGB backlight. Mounted as a shield on Arduino. Uses just two pins for communicating via I2C with Arduino. The module also has five buttons that can be read from Arduino. The module can also be used with any microcontroller that supports I2C. Note that this product is a kit and requires some assembly!
    Part.no: 41011770
    In stock: 8 
    Buy
    1 - 279.00
    10 - 251.10
    25 - 209.25

  • TFT01 adapter shield v2.0 for Arduino Mega

      TFT01 adapter shield v2.0 for Arduino Mega
    The TFT01 LCD module is work in 3.3V voltage level and it's not compatible with Arduino MEGA pins , so we make a shield for Arduino MEGA. Now user can directly plug the TFT01 in the shield and stand on the Arduino MEGA board.
    Part.no: 41011589
    In stock: 3 
    Buy
    139.00