Electric Imp Breakout

Art.nr: 41011034
Tillverkare: Sparkfun
I lager: 1

Beskrivning

Adapterkort för Electric Imp. Kortet ger tillgång till alla portar på Electric Imp-kortet samt en autentiseringskrets som krävs för att kommunicera mot Imp Cloud-tjänsten. USB-porten kan användas för spänningsmatning (5V).

Kunder som köpte den här köpte ocksåKunder köpte också

  • Electric Imp Utvecklingskort

      Electric Imp Utvecklingskort
    We know what you're thinking, "What's the big deal? Looks like an SD card..." Well this is no SD card! The Electric Imp is a WiFi enabled development platform powered by a Cortex-M3 processor core. "Really?" Yup. In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics. It does this by integrating an 802.11b/g/n WiFi transceiver, a great antenna, a Cortex-M3 core and lots of flexible I/O in a tiny package. But the hardware is only part of what makes the Electric Imp an innovative platform. The development environment and workflow is totally cloud-based and in-browser! Simply program the Imp with your WiFi Network information using your iOS or Android smartphone (Optically! No special hardware required!) then log on to the Electric Imp developer website and program your module over-the-air! Development is done in-browser and in a language called "Squirrel," which is a C-like language with extensions to communicate with the hardware interfaces and the service. Thanks to cloud-power, you get many big system benefits like buffered I/O and crash recovery - plus you can push updates to devices in the field with a few clicks. There's even a Planner tool that makes it easy to design interactivity between your Imps. Note: Although, the Electric Imp comes in an SD form factor, it isn't compatible with standard SD devices and we're afraid you can't hack it from a basic SD breakout. Development boards are available and we're working on our very own right now, so stay tuned! Dimensions: 32 x 24 x 2.1mm Features: Super Small Form Factor WEP, WPA and WPA2 encryption Cortex-M3 core gives great performance combined with low power consumption 6 I/O - UARTs, I2C, SPI, analog in and out, PWMs, GPIOs... all selectable under software control No SDK to install, no JTAG pods, no long download times... you develop your code in a browser-based IDE Software that runs on the Imp is written in Squirrel, a C-like language Data passes to and from the service over a TLS encrypted interface
    Art.nr: 41011038
    I lager: 3 
    319.00

  • LM335Z TO-92 Temperaturgivare precision

      LM335Z TO-92 Temperaturgivare precision
    Temperaturgivare i TO-92 kapsel. med linär utgång. Temperaturområde: -40 - 100°C
    Art.nr: 40350335
    I lager: 64 
    1 - 15.00
    10 - 13.50
    25 - 11.25

  • Kopplingstråd byglar för kopplingsdäck - mjuka 65st

      Kopplingstråd byglar för kopplingsdäck - mjuka 65st
    Paket med 65st testsladdar i olika längder och färger. Ett måste i varje labb! Passar i kopplingsdäck. Varje kabel är terminerad med ett ø0.5mm anslutningsstift. Innehåll: * 45st 100mm * 10st 150mm * 5st 180mm * 5st 230mm
    Art.nr: 41003181
    I lager: 893 
    1 - 35.00
    10 - 31.50
    25 - 26.25
    100 - 21.00

  • Stiftlist 2.54mm 1x40p brytbar

      Stiftlist 2.54mm 1x40p brytbar
    40-polig stiftlist med 2.54 mm benavstånd för kretskortsmontage. Går att klippa till önskad längd. Höjd (ram): 2.54mm Total höjd: 11.54mm
    Art.nr: 41001167
    I lager: 5025 
    1 - 9.00
    10 - 8.10
    25 - 6.75
    100 - 4.50

  • Electric Imp Shield (utgående)

      Electric Imp Shield (utgående)
    If you aren't familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics. Of course, if you're developing for it you'll need a way to get in there and poke around. The Electric Imp Shield allows you to connect your Arduino project to the internet through your home WiFi network. This way, your Arduino can take advantage of the Imp Cloud service and connect to HTTP APIs. The Shield connects one of the imp's UARTs (Imp pins 5 and 7) to either the Arduino hardware UART or a software serial on pins 8 and 9. It defaults to the software serial, but there are jumpers on the bottom side to set it to the hardware serial. A couple imp pins (8 & 9) are also connected to LEDs. They can be disconnected via jumpers on the bottom, if you'd like. Because the Electric Imp can draw up to 400mA on the 3.3V line, this shield has its own voltage regulator which is fed from the 5V Arduino line. Most Arduino compatible boards should be able to handle this amount of draw but beware that some clones that use less robust VREGs could see trouble
    Art.nr: 41011032
    I lager: 4 
    209.00

  • Stiftlist 2.54mm 1x40p vinklad brytbar

      Stiftlist 2.54mm 1x40p vinklad  brytbar
    40-polig vinklad stiftlist med 2.54 mm benavstånd för kretskortsmontage. Går att klippa till önskad längd.
    Art.nr: 41003799
    I lager: 1266 
    1 - 11.00
    10 - 9.90
    25 - 8.25
    100 - 5.50