Batteri LiPo 3.7V 6000mAh

Art.nr: 41003123
Denna produkt har utgått

Beskrivning

Uppladdningsbart Litium-polymerbatteri med JST-PH-kontakt. Batteriet har inbyggt skydd mot överbelastning, kortslutning och underspänning. Batteriet har bra självurladdningsegenskaper (<8%/månad). Observera att batteriet måste laddas med en LiPo-laddare!

* Laddspänning: 4.2V

* Nominell spänning: 3.7V

* Lägsta spänning: 3.0V

* Kapacitet: 6000mAh

* Arbetstemperatur: -25 till +60°C

* Dimensioner: 60 x 54 x 19mm

* Vikt: 109g

FilerFiler

Kunder som köpte den här köpte ocksåKunder köpte också

  • Stiftlist PH 2-pol 2.0mm

      Stiftlist PH 2-pol 2.0mm
    Stiftlist JST-PH. 2mm bendelning. Rakt utförande.
    Art.nr: 41004562
    I lager: 256 
    1 - 2.23
    10 - 2.01
    25 - 1.67
    100 - 1.34

  • BLE Mate 2

      BLE Mate 2
    This is the SparkFun BLE Mate 2, an efficient and reliable Bluetooth 4.0 development board. The BLE Mate 2 closely resembles a breakout board, in that nearly every pin on the on-board BC118 module is made available to access. This board is actually a close cousin to our Gold and Silver Bluetooth Mates and functions in a very similar way but, as the name implies, operates as Bluetooth Low Energy instead of Bluetooth 2.0. The BLE Mate 2 offers a six-pin header on the end opposite the BC118 module which is used as a host serial pinout, the same as that on the FTDI Basic boards, which allows the BLE Mate 2 to be connected directly to any device with a matching header, such as the SparkFun Arduino Pro and Pro Mini. Coupled with the FTDI SmartBasic, you can even develop your code without having to swap cables! The board has built-in level translation, so it can be used with boards of higher voltage than the 3.3V default used by the BC118. Each BLE Mate 2 offers BC118 module that is capable of accepting and transmitting via the UART at 9600bps (default) with a frequency band of 2,402 MHz to 2,480 MHz. The SparkFun BLE Mate 2 only supports Bluetooth 4.0; it wont connect to older devices. Its also worth noting that BLE does not support a Serial Port Protocol as older versions of Bluetooth did; that makes interoperability between BLE dongles, devices, and modules harder than with Bluetooth Classic. Features: Bluetooth Certified 4.0 (BLE) Supply Voltage: 3.3V to 4.7 VDC Low power consumption : 16mA avg Frequency Band: 2,402 MHz to 2,480 MHz Operating Range: 30m Built-in antenna
    Art.nr: 41013588
    I lager: 1 
    299.00

  • Open log datalogger (utgår)

      Open log datalogger (utgår)
    OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power this device up and send it serial commands. 'new' will create a new file. 'md' makes a directory. '?' brings up the list of commands. OpenLog doesn't do a lot, but it does log serial streams extremely well. Example: >new testfile.txt >append testfile.txt That's really it! You don't even have to send the Ctrl+z (ASCII 26) to complete the file. The buffer will store all received characters as they come in (a maximum of 511 bytes may be lost in the buffer if Ctrl+z is not received). You don't even need to create the file - you can do that on a computer using a microSD reader. Please see the notes at the beginning of main.c for more information. OpenLog firmware is open source and is based on Roland Riegel's FAT library. OpenLog currently supports FAT16 (upto 2GB microSD cards). We're working on FAT32 and would love your help! Features: * Log to low-cost microSD cards up to 2GB * Simple command interface * Configurable baud rates (2400 to 115200bps) * Doesn't drop characters even at full-blast 115200bps * Power, ground, and RX-I are the minimum connections * Reprogrammable ATmega328 using the standard STK500 serial bootloader * Two LEDs indicate writing status * Input voltage from 3.3V to 12V * 8mA idle, 18mA at maximum recording rate Dimensions: 0.16 x 0.6 x 0.75" (4 x 15 x 19mm)
    Art.nr: 41003903
    I lager: 3 
    249.00

  • DC-plugg 2.1mm plast (2.1x5.5x9.5mm)

      DC-plugg 2.1mm plast (2.1x5.5x9.5mm)
    DC-plugg i plast för montering på kabel. 2.1mm centerstift. 9.5mm längd.
    Art.nr: 41002396
    I lager: 52 
    1 - 8.00
    10 - 7.20
    25 - 6.00

  • Labsladd 6-pin 150mm

      Labsladd 6-pin 150mm
    6-polig labbsladd för anslutning till vanliga stiftlister med 2.54mm bendelning. * Längd: 150mm
    Art.nr: 41010416
    I lager: 8 
    1 - 19.00
    10 - 17.10
    25 - 15.20

  • Motstånd 3.9kohm 0.125W SMD 0805

      Motstånd 3.9kohm 0.125W SMD 0805
    Art.nr: 40819339
    I lager: 4217 
    1 - 0.35
    100 - 0.21
    1000 - 0.18