Kamera

Kameramodul HackHD 1080p

Art.nr: 41011041
Tillverkare: Sparkfun
I lager: 2

Beskrivning

Capturing high-definition video is a challenge for any project, but a great way to see where you're project has been, especially if it's something like an autonomous robot or a high-altitude balloon. The downside is that traditional video cameras can be heavy, difficult to mount, and triggering them to record can require some hacking. So why not use a video camera that was designed for hacking? The HackHD is a bare-bones camera that records 1080P video at 30 frames-per-second. Just attach a 3.7V Li-Po battery or other 3.7V source and a pushbutton and you have a fully functional camcorder. Because recording is triggered with a simple button-press, it can easily be controlled using a microcontroller or simple sensor.

Video is recorded onto a microSD card (not included) and the HackHD supports cards up to 32GB. The HackHD also has a composite video output which can be viewed while it's recording as well as an external audio input which overrides the on-board microphone when used. An LED can be attached to the LED output as an indicator of the camera's status.

Note: To save you a few bucks, we're selling just the camera by itself. The included instruction manual mentions a battery holder, pushbutton, LED, SD card, etc. but they are not included. You probably have those things laying around, why pay twice?

Dimensions: 65 x 40 x 25mm

Features:

Resolution: 1080P HD

Frame Rate: 30 FPS (frames per second)

Coding: H.264

Aspect Ratio: 16:9

File Format: AVI

Storage: External microSD Card (2GB - 32GB)

Lens: 2.5mm (EFL), F2.8, 160 degree (diagonal) wide angle lens

Control Input: Single contact monetarily switch

Video Output: Composite video

Status Indicator Output: Single color LED driver

Power Supply: External 3.7V, 1100mAH minimum

Power Output: 3.7V DC, 500mAH

Working Temperature: -10degC to +45degC

Storage Temperature: -20degC to +70degC

Kunder som köpte den här köpte ocksåKunder köpte också

  • Relä TQ2 2-pol växlande 5V 1A

      Relä TQ2 2-pol växlande 5V 1A
    Kretskortsmonterat relä med två växlande kontakter (DPDT).   Tillverkare: Panasonic (NAIS)
    Art.nr: 41011104
    I lager: 5 
    37.00

  • Micro-SD sniffer

      Micro-SD sniffer
    When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that. All necessary pins are broken out to an 8-pin 0.1" pitch header.
    Art.nr: 41003888
    I lager: 3 
    109.00

  • Ledande skum 6mm 100 x 150mm (ESD)

      Ledande skum 6mm 100 x 150mm (ESD)
    Ledande skum för förvaring och transport av IC-kretsar.
    Art.nr: 41000732
    Tillfälligt slut
    1 - 18.00
    10 - 15.30

  • DC-DC omvandlare 3.3V

      DC-DC omvandlare 3.3V
    Modul med switchregulator LM2576S.   Inspänning max 12Vdc Utspänning 3.3Vdc Ström max 1A   ET-MINI PWR3.3  
    Art.nr: 41010550
    I lager: 16 
    129.00

  • Wild Thumper 6WD Chassis - Black (34:1 gear ratio)

      Wild Thumper 6WD Chassis - Black (34:1 gear ratio)
    This is easily the most rugged and beefy robot chassis in its price range. The Wild Thumper 6-Wheel platform is the best of both worlds: It takes almost no time to go from un-boxing to rolling chassis, but it's also ready to be expanded on and makes great base stock for a serious 'bot. Each of the six motors are mounted on independent suspension and outfitted with 34:1 steel gearboxes (no more stripped gears!). The motors are wired together on a terminal strip inside the 2mm thick anodized metal frame and can be controlled on two channels (left and right). The entire chassis is perforated with 10mm pitched, 4mm diameter mounting holes and there is plenty of room interior to the chassis for batteries, drivers and other support hardware. The chassis comes with 6 of those gnarly Dagu 120mm off-road wheels. Because there are six motors total, each channel of your motor driver will need to be able to supply a decent amount of current to get things moving. This is a differential drive platform, meaning that a turn in accomplished by simply driving one side faster or slower than the other, or turning the two sides in opposite directions. Because the "pivot point" of this turn is essentially made up of the opposing three tires a gradual turn will require less power than a sharp one and the more power you can source, the more maneuverable your platform will be. We have had success driving this platform with our Monster Moto Shield. There is also a Wild Thumper motor controller listed below as well. Dimensions: 420 x 300 x 130mm (16.5" x 12" x 5") Features: "Super Twist" suspension keeps all your tires on the ground even on rough terrain Spiked 120mm off-road wheels are super 'grippy' 6 x 7.2v DC motors with 34:1 steel gearboxes 10mm pitched mounting holes Made from sturdy 2mm thick plate aluminum Recommended voltage: 2-7.5v
    Art.nr: 41010174
    I lager: 2 
    2 629.00

  • Komponentpåse 102x152mm skärmad (ESD)

      Komponentpåse 102x152mm skärmad (ESD)
    Förvaringspåse i ESD-skyddande plast. Används till IC-kretsar, transistorer, mm. Storlek: 102x154mm
    Art.nr: 41000729
    I lager: 100 
    1 - 2.20
    10 - 1.87
    100 - 0.88